When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking to get some more power out of my classic uk 2000. I have decat, panel filter and walbro pump. Ive heard mixed opinions on buying a wrx ecu, or just mapping what i have. Any ideas?
ESL do a daughterboard for your ECU. for a bit more money you could have ECUTEK or SimTek. If you wanted to go the whole hog there is MoTec or Solaris(Syvecs).
If you still have the factory ECU fitted, then fitting just about any of the other 4 plug units will give you a little more.
The Z4 a straight swop, but the Z5, and iirc 6k and 7k have a higher rev limiter so you have to look out for that.
As Duncan says, it all depends on your budget.
Last edited by Glowplug; 18 November 2010 at 01:16 PM.
ESL, wouldn't have a simtek till they sort out nock control and that aint gonna be any time soon
hi tidgy whats the issue with the knock control on the simtek,is there a issue that the simtek wont adjust timing/fuel when knock is detected ?? thanks in advance
hi tidgy whats the issue with the knock control on the simtek,is there a issue that the simtek wont adjust timing/fuel when knock is detected ?? thanks in advance
Yes that is correct, it will only flash the check engine light when det is detected.
aye as banny says, suposed to have been in the works for going on 18 months now, but still no sign of it. major flaw if you ask me cos by the time you have reacted to the flash could be all to late.
aye as banny says, suposed to have been in the works for going on 18 months now, but still no sign of it. major flaw if you ask me cos by the time you have reacted to the flash could be all to late.
that's what a wideband lamba and knocklink are for.
the one mentioning it being around before christmas he posted on 17 November 2009, he then comes on more or less bang on 12 months later saying hes too busy.