scooby wrx 1995 apexi downpipe 3 inch and full exhaust system
30 November 2010 | 06:11 PM
#1
scooby wrx 1995 apexi downpipe 3 inch and full exhaust system
hi can you help is this a good system for my baby scooby wrx 1995 apexi downpipe 3 inch and full 3 inch apexi exhaust system no cats let me no thanks
:lux hello:
:lux hello:
30 November 2010 | 06:43 PM
#3
One problem you will have is MOT emissions , unless yours is registered before 31st July '95.
30 November 2010 | 08:44 PM
#5
Sorry to hi-jack the thread. But is this correct, if your car is registered before 31 july 95 you can decat your car some MOT time?
I hope it is, but i thought it was 93.
30 November 2010 | 11:28 PM
#6
95 mate.
01 December 2010 | 09:12 AM
#7
Looking at, I maybe wrong, it says between 92 and 95 if it is in the book it would be a cat test. Mine is a 94 however it is a import would this mean its not in the book?
Trending Topics
01 December 2010 | 10:03 AM
#8
Update: Reply from VOSA.
"Dear Mr B,
Thank you for your email enquiry dated 23rd September 2010, concerning an emissions test.
The 'In Service Emissions' booklet is a UK specification booklet. If the
vehicle is an import then this information would not be captured in this
booklet. As the vehicle in question is an imported vehicle then depending
on the age would depend on whether the vehicle would be required to go
through a non-CAT test or whether it would go through a CAT test using the
default limits.
You have stated that vehicle registration B13 BAT is a 1993 vehicle. Due
to this the vehicle would be required to go through a non-CAT test and need
to meet the following limits:
CO <= 3.5%
HC <= 1200ppm
I hope this information has assisted you with your enquiry, but if you have
any further questions please do not hesitate to contact us again.
Kind Regards
Rebecca
VOSA Contact Centre
Operations Directorate
Tel: 0300 123 9000"
Think that clears it up nicely.
"Dear Mr B,
Thank you for your email enquiry dated 23rd September 2010, concerning an emissions test.
The 'In Service Emissions' booklet is a UK specification booklet. If the
vehicle is an import then this information would not be captured in this
booklet. As the vehicle in question is an imported vehicle then depending
on the age would depend on whether the vehicle would be required to go
through a non-CAT test or whether it would go through a CAT test using the
default limits.
You have stated that vehicle registration B13 BAT is a 1993 vehicle. Due
to this the vehicle would be required to go through a non-CAT test and need
to meet the following limits:
CO <= 3.5%
HC <= 1200ppm
I hope this information has assisted you with your enquiry, but if you have
any further questions please do not hesitate to contact us again.
Kind Regards
Rebecca
VOSA Contact Centre
Operations Directorate
Tel: 0300 123 9000"
Think that clears it up nicely
.So yeah, as you see.
The full thread is https://www.scoobynet.com/non-scooby...t-testers.html
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
KOEScoob
ScoobyNet General
6
17 September 2015 03:51 PM
