Hi has anyone wrapped there exhaust and if so how much do you need, i see the rolls are 10m by 2 inches roughly how much will that do ,and is it worth doing the centre section as well as downpipe.

 

hi there, yes it is a good idea to wrap your exhaust, , hotter gases escape quicker. so by wrapping exhaust keeps heat in pipework so gas goes faster ..

best to wrap uppipe/ down pipe. and if poss manifold. you will need a large amount of wrap, not sure , i just bought a it as i went along . hope this helps. cheers scoobymike

 

just done mine in thermo tec 2x50ftx1inch wide rolls plus sealer spray was enough to wrap each pipe individually until you get to a joint then overwrap the whole 2into 4 part . was also enough to do the up pipe , warning wear durex gloves its got copper in it and itches like a bstard if you get it on ure skin . lkperformance on ebay was the cheepest place 40quid a roll and 15quid for the sealer

 

Thanks guys gonna get my gloves out then and order a extra roll