Hi guys I changed my oil a few weeks ago but have just read on here that you are ment to disconnect the crank sensor and turn the car over a few time to increase the oil pressure?? i didnt do this... however i did fill the new oil filter up with oil... are there any knock on effects from what i have done?? also any ideas where the crank sensor is located on my car so that next time i can do it the correct way.

thanks guys!!

 

i think it would have knocked by now if it was going to.

crank sensor is in the middle at the front above the main pulley, its under the alternator a bit ,you can see it, the plastic connector is brown i think

 

i didnt know that changed my oil a month ago didnt un plug crank sensor i ent ad no proplems it dont say you have to in the owners manual so i think its b==s##t

 

lol its not b/s ask the specialists ,they all do it

 

ok thanks stedee i managed to locate the crank sensor how many times should you prime the ingnition before reconnecting it!!

thanks

 

till the oil warning light goes out

 

Should take about 20secs to extinguish...