hi guys, right this is where i am ive got a 6speed dccd box but nothing else to go with it so what exactly will i need to fit this to my type r and will the dccd still work ok?
also will my 5 speed clutch be ok as i had an ap paddle put in when my engine was built and dont fancy changing this just yet it cost to much!!

 

as far as i am aware you will need the gear linkage for the 6 speed box and a 6 speed propshaft and the 6 speed gearbox cradel and if you use your 5 speed starter and clutch you will be ok as for the dccd i dont have a clue sorry

 

You needed...

The rear gearbox crossmember, the rear diff. and the gear-linkage assembly with ****. A propshaft from a classic automatic fits.

DCCD will work fine, once you have connected the wires up... diagram required.

dunx

P.S. There's a tiny chance your rear diff is the correct ratio, but I doubt it.

 

Yes your clutch will work. But thats the least of your worries. You would be better to buy a complete 6 speed conversion for your car. IMO. Greersport racing have one for sale.

 

Im in the process myself, you will need.

linkage and ****
clutch fork
6 speed prop or auto prop from a classic
3.9 r180 rear diff, 3.54 r180 if its a uk box
6 speed mount

You can use your 5 speed clutch and flywheel, slave cylinder and gearbox cradle. That should cover it.

Speak to someone like API (David) he will confirm

 

Dont forget stub axles....and new seals.

 

Yep and them, but if it's come from a pre 2004 car it should already have them

 

the 6 speed gearbox is from an 03 spec c. any idea where i could source the parts i need?
thanks every1