Service Advice pls
#1
Service Advice pls
The scoob is up for service and looking at doing it myself, but need advice on the following pls:-
What is the best engine oil to use considering the car has done 133000 miles? (semi or fully syn??)
The best plugs to fit as the boost is now around 1.1bar?
Also i will need to replace the discs and pads all around. Got to stick with the 2 pot fronts and 277F/266Rmm discs for now due the original speedlines. Any suggestions or recommendations pls?
ta. Kyle
1997 Prodrive WR
All PPP packs.
133000 miles
Green panel filter
Baileys DV
Samco's
STI TMIC
MBC - TD04L on 1.1bar.
What is the best engine oil to use considering the car has done 133000 miles? (semi or fully syn??)
The best plugs to fit as the boost is now around 1.1bar?
Also i will need to replace the discs and pads all around. Got to stick with the 2 pot fronts and 277F/266Rmm discs for now due the original speedlines. Any suggestions or recommendations pls?
ta. Kyle
1997 Prodrive WR
All PPP packs.
133000 miles
Green panel filter
Baileys DV
Samco's
STI TMIC
MBC - TD04L on 1.1bar.
#2
Oil
Millers CFS or Fuchs Titan Race - 10W-40 or 10W-50
Plugs
NGK PFR6B (or 7B)
Brakes
Upgrade to the SUBARU 4-pots/294mm discs and decent pads (I have these item for sale...)
Millers CFS or Fuchs Titan Race - 10W-40 or 10W-50
Plugs
NGK PFR6B (or 7B)
Brakes
Upgrade to the SUBARU 4-pots/294mm discs and decent pads (I have these item for sale...)
Last edited by joz8968; 30 December 2010 at 08:41 PM.
#4
cheers M8s
I will try Opie as well, but Millers sounds good.
I would like to buy the 4 pots but it will mean changing the original prodrive speedlines as they do not have the clearance like the RB5 ones.
I will try Opie as well, but Millers sounds good.
I would like to buy the 4 pots but it will mean changing the original prodrive speedlines as they do not have the clearance like the RB5 ones.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 11:49 AM