Notices
General Technical
Sponsored by:
Sponsored by: CARiD

low oil pressure?... not sure

Thread Tools
 
Search this Thread
 
Old 10 March 2011 | 12:48 PM
  #1  
Scooby_CL's Avatar
Scooby_CL
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: May 2010
Posts: 266
Likes: 0
From: Hertfordshire
Default low oil pressure?... not sure

Been having my turbo rebuilt so car has been off the road for about 3-4weeks.

everything is sorted and back together so took it for its first slow test drive this morning...

what should a 2005 sti8 oil pressure be?

currently warm 90degree on defi gauge, oil pressure it showing 2.5bar. It goes up fine to a nice 6.5 on cruise and on WOT can peak near 8bar.

how low is too low? is around 2-2.5bar bad? cant remember it being as low as this but could just be me being paranoid after putting it all back together again and hoping nothing goes wrong lol
Old 10 March 2011 | 12:50 PM
  #2  
banny sti's Avatar
banny sti
Scooby Senior
iTrader: (68)
 
Joined: Oct 2004
Posts: 16,598
Likes: 22
From: Type R
Default

Sounds perfectly normal
Old 10 March 2011 | 12:53 PM
  #3  
Scooby_CL's Avatar
Scooby_CL
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: May 2010
Posts: 266
Likes: 0
From: Hertfordshire
Default

sweet, just me being paranoid then.

i did hit up the search function but put the word oil in there and all hell brakes loose
Old 10 March 2011 | 01:09 PM
  #4  
alcazar's Avatar
alcazar
Scooby Regular
iTrader: (2)
 
Joined: Jun 2002
Posts: 40,781
Likes: 27
From: Rl'yeh
Default

Mines on 3 bar, or a bit below when HOT on tickover, forged engine.
Old 10 March 2011 | 04:12 PM
  #5  
Ian's Avatar
Ian
Scooby Regular
iTrader: (10)
 
Joined: Jul 2005
Posts: 7,845
Likes: 1
From: Cambridge
Default

mine is the same as alcazar

also what revs does it idle at? as if it idles at lower reves, then there will be alittle less pressure

mine at around 800 ish revs on idle has around 2.7/2.8 bar when at 90degc
and 920 revs, it sits around the 3 bar mark

edited to say....

my oil is silkolene pro s 10/50


Last edited by Ian; 10 March 2011 at 07:06 PM.
Old 10 March 2011 | 05:52 PM
  #6  
JohnD's Avatar
JohnD
Scooby Regular
iTrader: (5)
 
Joined: Apr 2000
Posts: 6,252
Likes: 1
From: Havering, Essex
Default

You really should quote the grade of oil when talking oil pressures!

JohnD
Old 13 March 2011 | 06:51 PM
  #7  
killerbmotorsport's Avatar
killerbmotorsport
Former Sponsor
 
Joined: Aug 2009
Posts: 66
Likes: 6
From: USA
Default

The factory minimum spec is 1bar so you should be set
Old 13 March 2011 | 07:03 PM
  #8  
Scooby_CL's Avatar
Scooby_CL
Thread Starter
Scooby Regular
iTrader: (2)
 
Joined: May 2010
Posts: 266
Likes: 0
From: Hertfordshire
Default

Need to do an oil change, can't remember off my head what grade in currently in there but probably a 10w40 fully synthetic will replace. Seems fine been sitting around 6-8 bar on warm up and driving then settling around the 2.5-3bar mark fully warm
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
04 November 2021 08:12 PM
Ganz1983
Subaru
5
02 October 2015 10:22 AM
crazyspeedfreakz
ScoobyNet General
5
29 September 2015 06:04 PM
WrxSti03
Drivetrain
11
29 September 2015 11:21 AM




All times are GMT +1. The time now is 05:16 AM.