Can someone tell me what bloody pipe to connect my Boost gauge on a Wrx Blob as ive just given up and about to throw it across the room.
Since im abit of a thicky.....Can you tell me in idiot terminology...Photos would help
Thanks

 

you can use the pipe that goes onto the dump valve (black one in pic ! ) just cut it somewhere and put the t piece in and it will work fine.

 

Ive tryed that mate......Still no joy.....
What could that be?

 

no idea but thats the pipe you should be using. mine is connected to this and works fine.
is it pro sport gauge by any chance?

 

as above tapped into to the vac coming from the existing recirc valve on my 2002 sti works bang on!!

 

my blobeye uses the same hose no problem here either and mine is the auto gauge

 

i would check your other connections other than the vacuum hose as that is the correct one as confirmed by a few blob owners already
if its a prosport check the connector is plugged in correctly on the back of the gauge as the dont fit well at all

 

I had this exact same problem when i fitted mine.As above it should work of there,anyway in the end i found the needle was stuck. It was a ( revotec ) gauge and i just gave it a split second blast of air of the compressor,the needle moved and its been ok ever since.