Drop link advice pls guys...
#1
Scooby Regular
Thread Starter
Join Date: Oct 2008
Location: huddersfield
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
![Unhappy](https://www.scoobynet.com/images/icons/icon9.gif)
Ok here we go.... i have a my00 turbo and I changed the bushes on the rear drop links to Superflex ones as the ARB was rattling like hell. Drove down the road, handled miles better no rattles etc all happy.... except a few days later the rattle re-appeared but a lot lot worse
Pulled over to have a look and it looks like the bolt has pulled the bush straight through the drop link
bolt still fixed to the car but no bush.. went back to look for it but no-where to be seen
Typical!!
I limped it home and i've managed to bodge it for now with one of my old bushes (fresh from the bin lol) but what should i do now?
I could just get another bush but surely it'll just do the same thing? - i don't fancy buying new ones every 5 mins at 45 quid a throw!!
I've seen the whiteline ones and the alloy solid ones on ebay etc but has anyone actually tried these out are they any good?
Thanks in advance on this one....
![Suspicious](https://www.scoobynet.com/images/smilies/Suspicious.gif)
Pulled over to have a look and it looks like the bolt has pulled the bush straight through the drop link
![EEK!](https://www.scoobynet.com/images/smilies/eek.gif)
![Cry2](https://www.scoobynet.com/images/smilies/cry2.gif)
I limped it home and i've managed to bodge it for now with one of my old bushes (fresh from the bin lol) but what should i do now?
![Ponder2](https://www.scoobynet.com/images/smilies/ponder2.gif)
I could just get another bush but surely it'll just do the same thing? - i don't fancy buying new ones every 5 mins at 45 quid a throw!!
I've seen the whiteline ones and the alloy solid ones on ebay etc but has anyone actually tried these out are they any good?
Thanks in advance on this one....
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM