Notices
General Technical
Sponsored by:
Sponsored by: CARiD

What could be wrong if anything?

Thread Tools
 
Search this Thread
 
Old 05 May 2011 | 08:00 PM
  #1  
GONZO01's Avatar
GONZO01
Thread Starter
Scooby Regular
iTrader: (6)
 
Joined: Feb 2007
Posts: 1,503
Likes: 1
From: South Wales,Swansea.
Default What could be wrong if anything?

Evening all just a quick post. I noticed today that at lower revs or when pulling off there is a strange noise coming from my engine bay it doesn't sound like knocking but similar it's hard to explain. When people say their bottom end is knocking what does it sound like is it like a knocking sound when you knock a front door or is it more like the sound when your tappets have gone like a old escort or fiesta sounds. Please help people just want some advice as to what could be the problem.
Old 05 May 2011 | 08:08 PM
  #2  
lazadude's Avatar
lazadude
Scooby Regular
iTrader: (1)
 
Joined: May 2010
Posts: 266
Likes: 0
From: Fleet, Hants
Default

Knocking:

http://www.youtube.com/watch?v=J0_nIqSa6wM
Old 05 May 2011 | 09:50 PM
  #3  
j200 hew's Avatar
j200 hew
Scooby Regular
 
Joined: Jul 2009
Posts: 61
Likes: 0
Default

could be a collapsed tappet i had a similer noise on my classic. is it on one side of the engiene if so def tappet
Old 05 May 2011 | 10:03 PM
  #4  
snake1906's Avatar
snake1906
Scooby Regular
iTrader: (4)
 
Joined: Feb 2010
Posts: 1,151
Likes: 0
From: cornwall
Default

or hopefully just a heat sheild or something you should be able to hear bottom end rattle at idle even in the early stages and no i doesnt sound like some1 knocking on a door if you shake and spray can and you hear the noise the bearing makes think if that bearing was bigger thats the sort of noise
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SilverM3
ScoobyNet General
8
24 February 2021 01:03 PM
thunder8
General Technical
0
01 October 2015 09:13 PM
Phil3822
Lighting and Other Electrical
20
27 September 2015 07:39 PM
amego
Other Marques
6
25 September 2015 02:04 PM



Quick Reply: What could be wrong if anything?



All times are GMT +1. The time now is 10:23 PM.