Compatable turbo
#1
Scooby Newbie
Thread Starter
Join Date: Sep 2011
Location: coventry
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Hi All,
Can anybody please advise whether or not and 02 WRX turbo will fit directly onto a 98 classic (face lift version). Any advice would be much appriciated ...
Gaz ...
Can anybody please advise whether or not and 02 WRX turbo will fit directly onto a 98 classic (face lift version). Any advice would be much appriciated ...
Gaz ...
#4
Scooby Newbie
Thread Starter
Join Date: Sep 2011
Location: coventry
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Thanks for coming back on this one guys, the car I have is a standard UK turbo, and it does have a TD04 as is the one I'm considering. I was just a little concerned that with the MY diffference there may have been some changes that would make the transfer difficult .... i take it from your post that's not the case ?
As always, your help is appriciated ....
Gaz
As always, your help is appriciated ....
Gaz
#5
Scooby Regular
iTrader: (10)
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
No mate it will bolt straight on,without any issues.
I think there is a slight difference in the newage td04 turbo to the classic td04 turbo as it has a slightly bigger compressor wheel than the classic,but that if anything it should aid performance.
![Thumb](https://www.scoobynet.com/images/smilies/thumb.gif)
![Norty](https://www.scoobynet.com/images/smilies/norty.gif)
Last edited by midnight; 07 September 2011 at 12:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post