hi i have swapped my speedo to the sti jap with the big rev counter in the middle, my subaru is a 1999 v5 . It *was in mph and now i have swapped it its in kpm. I have a speedm8 what has a delimiter on it that I don't think I need as my car is a uk model and does not have a limit on it. I don't no if this is the right one to fit or were the wires go, I haven't removed the speedm8 from the car that I am braking it's still wired in, im thinking of copying it how it's wired in when I wire it in my car, it is wired in to a jap sti 1999 v5 so thinking it's the same or do I miss one out for the delimiter? I am a bit Stuck I need some advice thanks.


I decided to just copy the wires and miss the brown wire out for the delimiter and it in mph now

 

black to black

 

green and yellow stripe cut and tapped in with the blue wire on speedo plug side

 

Grey tapped in to the other green and yellow stripe ecu side

 

red tapped in to the green and black stripe speedo plug side

 

speedo plug shot

 

the green and yellow striped cut at the ecu and tapped in with brown