ukpaisley

iTrader: (4)

Been loking, but has anyone used one?
Is there a standard harness , or is it going to be a DIY job.

Anyone map these ECU's ?

Jolly Green Monster

iTrader: (4)

done a fair few on other makes, dont remember doing one on a subaru, would imagine there is a plug and play version.

I believe the owner was in partnership with GEMS originally and then the two partners fell out and the companies split.. so it is fairly similar to GEMS, and in some ways better.

Not sure how much they cost but might work out cheaper to get a more common subaru ecu supplied and fitted etc.

Simon

ukpaisley

iTrader: (4)

Thanx, for the reply i have been looking, just havent found any posts, plenty about Gems tho ' LOL

Jolly Green Monster

iTrader: (4)

generally speaking the gems specialises more in the subaru/evo plug and play and the omex has really been used more on unusual stuff, mapped a couple of volvo's on omex for example.

ukpaisley

iTrader: (4)

In the past I would giggle , but volvos make good motors !

Jolly Green Monster

iTrader: (4)

Yeah one was an ametur(sp?) touring car with around 550bhp through front wheels and caged and totally stripped and was surprisingly light, expected a volvo to be heavier.
Full throttle and it was a case of trying to work out which hedge we were going to go through.

I am sure I did another car on an omex but cant recall what it was.. I am going to have to check now.

Simon

ukpaisley

iTrader: (4)

I have omex 600 for £450, with the sensors, or ESL , these are my two options now for my ECU. I have spent all the rest of my ££ on the new engine and intercooler lol.

jura11

iTrader: (7)

For £450 or more you can have MegaSquirt/ExtraEFi

http://www.extraefi.co.uk/MS_All_products.htm


Jura

ukpaisley

iTrader: (4)

Part of me wants to do this just to be different , plus if the engine is out it maybe a good time to fit a trigger wheel.