bubba j

iTrader: (1)

hi ya,
could anyone please tell me what the clutch and flywheel torque settings are, for my 2006 hawkeye wrx??

cheers dave

merlin24

iTrader: (1)

75Nm for the flywheel bolts
16Nm for the clutch cover bolts
Use a diagonal tightening sequence for both.

Mick

PeeVee

iTrader: (1)

Hi Bubba,

Taken from the WkShop Manual:

FLYWHEEL:

NOTE:
Tighten the flywheel installing bolts gradually. Each bolt should be tightened to the specified torque in a crisscross fashion.

Tightening torque: 72 N⋅m (7.3 kgf-m, 52.8 ft-lb)

CLUTCH COVER:

Tightening torque: 16 N⋅m (1.6 kgf-m, 11.8 ft-lb)

NOTE:
• Align match marks when reassemble.
• Note the front and rear of the clutch disc when installing.
• Tighten the clutch cover installing bolts gradually. Each bolt should be tightened to the specified torque in a crisscross fashion.

bubba j

iTrader: (1)

thanks for the replies, really appreciate it

PeeVee

iTrader: (1)

Awe.... Beaten to it ^

marcevs72

iTrader: (5)

plus use loctite threadlock on the flywheel bolts

bubba j

iTrader: (1)

will do !!