Rebuilding my 1st bock
#1
Scooby Regular
Thread Starter
Join Date: Jun 2008
Location: Cardiff
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Hi guys any advice you can give me on rebuilding my 1st block? I.e some trade secrets into making it as reliable as possible? Also what sealant is best to use for the 2 block faces? Thanks in advance.
#2
Scooby Newbie
Join Date: Jan 2006
Location: Aylesbury Buckinghamshire.
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Hi Lee
Can help with any advice, 3 bond or loctite grey sealent, what block and spec you building too?
Thanks
Stephen
www.primeiromotorsport.com
Can help with any advice, 3 bond or loctite grey sealent, what block and spec you building too?
Thanks
Stephen
www.primeiromotorsport.com
#3
Scooby Regular
Thread Starter
Join Date: Jun 2008
Location: Cardiff
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Thanks for the quick reply, it's having a known good crank fitting into a known good block but all 2nd hand and standard, want to replace the shells but I was going to buy acl and found out there are 2 types, which ones do I need? Is it worth replacing the rings or should they be ok? They have done 81k miles.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM