johnpye

iTrader: (3)

Can any one shed some light on how hard this is too do. I have a blob sti and want to change to the hawk dials, has anyone done it or know of a good how too?

tubbytommy

iTrader: (20)

What blob do you have and which model hawk clocks do you want to install!
If its hawk sti you will have the dccd lights on the cluster which will be no use.
Go for a pre 05 blob clocks which i think are a straight swap

johnpye

iTrader: (3)

Mine An 04 sti. Clocks from 2006 spec d.

Thanks

Wilky0302

iTrader: (4)

I have just fitted some in my WRX and it wasnt too difficult aprt from all the instructions on the web show the plugs the wrong way round so when you need to cut a wire +12v from the original clocks it gets a bit confusing !! just put a bit of tape over the diff light and as for the dccd it has a light on that doesnt affect the clocks in anyway.....

tubbytommy

iTrader: (20)

as above but if you have an sti already all your going to gain is dccd lights that are no use anyway.

johnpye

iTrader: (3)

Sweeping defi dials is what I'm after.

johnpye

iTrader: (3)

I want the black sweeping dials to match my defis