When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I chcked mine today and it's deffo 8mm ID that's from the fuel pump to the feul filter and from the filter to the fuel rail. Same size on both my inlet manifolds, 1 being a 98 uk turbo and 1 being a 2004 uk sti. So might be worth getting a tape measure out
I chcked mine today and it's deffo 8mm ID that's from the fuel pump to the feul filter and from the filter to the fuel rail. Same size on both my inlet manifolds, 1 being a 98 uk turbo and 1 being a 2004 uk sti. So might be worth getting a tape measure out
Is that by pulling the pipe off mate as the end where it go's onto the hard pipe can swell from being pushed over the hard line making it seem larger?
Is that by pulling the pipe off mate as the end where it go's onto the hard pipe can swell from being pushed over the hard line making it seem larger?
No I actually have some left over pipe from when I replaced all my lines, and I also measured the steel hard lines that the rubber hoses push onto. I'm confused now lol.