Engine Re build
#5
Moderator
iTrader: (4)
Joined: Jul 2004
Posts: 18,687
Likes: 0
From: The Terry Crews of moderation. P P P P P P POWER!!
For an engine build, it's worth going a bit out of your territory to get the best. It's not something you want to get done twice!!
APi get my vote.
Give David a phone and he'll tell you whether it's worth your while to get the build done now or just drive what you've got until it breaks!
APi get my vote.
Give David a phone and he'll tell you whether it's worth your while to get the build done now or just drive what you've got until it breaks!
#6
To rebuild it while it's running ok is a good idea, you could put a set of rods and pistons in it with new bearings etc, this would cost alot less than if it goes bang. If it rattles a big end you will then need a crank and modine as well, that would cost you an extra £500+, theres also alot more time needed to prep/clean the engine after a blow up.
Trending Topics
#8
I would have to say if you have the money get it done check API mate great company friendly and all ways willing to help even just for info . David is a nice chap who allways willing to help , Si who was my piont off call when I was haven my build couldnt ask for better Quick turn around and was very paicent with me getting the money together worth a look mate
http://www.apiimpreza.com/
http://www.apiimpreza.com/
Last edited by mitman2501; 27 March 2012 at 12:28 PM.
#11
Joined: Jul 2003
Posts: 6,377
Likes: 3
From: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
API Impreza
3 & 4 Churchlands Farm Ind. Est.
Bascote Road
Harbury
Warwickshire
CV33 9PL England
Phone 44 [0] 1926 614333
Fax 44 [0] 1926 614907
www.apiengines.com/index3.php
dob@apiengines.com
www.apiimpreza.com
www.apiengines.com
There you go......................
3 & 4 Churchlands Farm Ind. Est.
Bascote Road
Harbury
Warwickshire
CV33 9PL England
Phone 44 [0] 1926 614333
Fax 44 [0] 1926 614907
www.apiengines.com/index3.php
dob@apiengines.com
www.apiimpreza.com
www.apiengines.com
There you go......................
#12
Hi there
contact Neil@Slowboy racing,he is based near Brands Hatch he build our 2.1 and basically whole build
http://www.slowboy-racing.co.uk/inde...d=2&Itemid=120
Jura
contact Neil@Slowboy racing,he is based near Brands Hatch he build our 2.1 and basically whole build
http://www.slowboy-racing.co.uk/inde...d=2&Itemid=120
Jura
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM