Hi all,

Thinking about braided fuel hose, I have parallel fuel now but only normal hose and want to make things look better, also safer as worries me if the normal hose rubs.


So does anyone know of the bits and pieces I need. Any help would be much appreciated

Thanks

 

Make sure you buy Goodridge only for quality and you will need 6mm ID[inner diameter] pipe mate,around 2 metre's will do the job

 

Goodridge is the best but at a cost of course, Mocal do some PTFE SS braided hose that is about £8 a meter that i beleive is also good.

http://myworld.ebay.co.uk/torques_uk/

They have loads of bits.

Thanks

 

Alex at torques supplied me with Teflon braided hose and fittings give him a call very helpfully guy tell him I sent you

 

Also the ends where do I get those.

Will look into it more then.

 

Torque do a full range of fittings everything you need he can supply

 

www.merlinmotorsport.co.uk

they are based at castle coombe track so if your going to Japfest you can purchase there.
they also offer free assembly of fittings. They only do Goodridge. It will cost about £250 for all fittings and hose

 

Lovely. Might go to japfest then

 

Nice looking set up mate

 

Thanks well see if it works in a couple weeks !