rossbrown316

Hi guys wonder if you can help me just bought a fmic from ebay and was checking if anyone had fitted one of these or could help. Got alot of pipes in correct place but not sure where dumpvalve goes.

Link: http://www.ebay.co.uk/itm/SUBARU-IMP...item1c2c2dba09

Thanks

JonWright_

I got the same. It's goes on the the round bit sticking out. Around where the old intercooler was some dump valves do not fit and either need an adaptor or a new dump valve.

rossbrown316

Is that the round bit with 2 holes that look like bolts go in to. I have got a baileys dv. Any other tips you can give me for this pleae would be great.

Thanks

JohnD

iTrader: (5)

No, that's the tube that joins the filter to the intake tube and takes the mass airflow sensor. The dump valve connects with a silicon tube, to the short pipe welded to the pipe that goes to the throttle body.
This kit is the same as the Japspeed kit.
If you PM me your Email I can send the fitting guide.

JohnD

mickywrx

iTrader: (29)

You'll need an adaptor if your DV was bolted to the top mount.

rossbrown316

Sorry to be a pain have you got a link to the adapter or is it just a relocation kit.

Thanks

peter zippy reid

iTrader: (25)

Think Harvey on here sell the adaptor

rossbrown316

do you know where else i can get one as i have pm harvey and had no response.

thanks

JohnD

iTrader: (5)

Apparantly, Harvey's unwell at the mo.
If you search on Ebay you may find something. I recall seeing an adaptor kit of some kind.

JohnD