Notices
General Technical
Sponsored by:
Sponsored by: CARiD

APEXI TURBO

Thread Tools
 
Search this Thread
 
Old 29 November 2012 | 08:49 PM
  #1  
scoobyman2007's Avatar
scoobyman2007
Thread Starter
Scooby Regular
iTrader: (5)
 
Joined: Oct 2009
Posts: 1,651
Likes: 2
From: london sw
Default APEXI TURBO

apexi turbo for a 95 sti are they good or not help me pleas
Old 30 November 2012 | 09:27 AM
  #2  
Shaks-STI's Avatar
Shaks-STI
Scooby Regular
iTrader: (7)
 
Joined: Aug 2009
Posts: 1,877
Likes: 0
From: Leicester
Default

What power are you looking for? What has been done to the engine i.e forged?

More info needed mate, what Apexi turbo are talking about?

Last edited by Shaks-STI; 30 November 2012 at 09:31 AM.
Old 30 November 2012 | 09:47 AM
  #3  
scoobyman2007's Avatar
scoobyman2007
Thread Starter
Scooby Regular
iTrader: (5)
 
Joined: Oct 2009
Posts: 1,651
Likes: 2
From: london sw
Default

Hi looking for 350 to 400 bhp mate got up fpump 440 injected hks filtr apexi pfc apexi avcr hid front mont full reg decat and lots more and the turbo is ax53b70 let me no if it is good as I have a td05
Old 30 November 2012 | 09:54 AM
  #4  
Shaks-STI's Avatar
Shaks-STI
Scooby Regular
iTrader: (7)
 
Joined: Aug 2009
Posts: 1,877
Likes: 0
From: Leicester
Default

I dont really know much about the Apexi turbo tbo mate, but you will need bigger injectors 740cc and Walbor or HRC fuel pump.

Have you considered SC42 billet? that will get you to 400bhp, TD05 20g will get you arround 380hp or more depending on supporting mods.

What gear box do you have? At this power level you will be hitting arroung 350-380ftlbs and thats a problem for classic gear box of that age.
Old 30 November 2012 | 09:58 AM
  #5  
scoobyman2007's Avatar
scoobyman2007
Thread Starter
Scooby Regular
iTrader: (5)
 
Joined: Oct 2009
Posts: 1,651
Likes: 2
From: london sw
Default

Hi I have a td05 20g mate and a 6 speed box
Old 30 November 2012 | 09:59 AM
  #6  
Shaks-STI's Avatar
Shaks-STI
Scooby Regular
iTrader: (7)
 
Joined: Aug 2009
Posts: 1,877
Likes: 0
From: Leicester
Default

You should see those figures with 20g mate as long as its a genuine 20g.
Old 30 November 2012 | 10:01 AM
  #7  
scoobyman2007's Avatar
scoobyman2007
Thread Starter
Scooby Regular
iTrader: (5)
 
Joined: Oct 2009
Posts: 1,651
Likes: 2
From: london sw
Default

Yes it is m8
Old 30 November 2012 | 10:12 AM
  #8  
Shaks-STI's Avatar
Shaks-STI
Scooby Regular
iTrader: (7)
 
Joined: Aug 2009
Posts: 1,877
Likes: 0
From: Leicester
Default

Then you need bigger injectors and a remap, you should seen over 350 with 20g.

In regards to injectors, speak to Mark @ lateral performace about reflowing injectors, but you will need phase 2 injectors and adapters and Mark can supply adapters aswell.

I have AF20g at 370bhp and was advised by a mapper with bigger injectors will reach 400.

Last edited by Shaks-STI; 30 November 2012 at 10:13 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
04 November 2021 08:12 PM
Ganz1983
Subaru
5
02 October 2015 10:22 AM
thunder8
General Technical
0
01 October 2015 10:13 PM
madmover
Member's Gallery
4
28 September 2015 11:46 AM




All times are GMT +1. The time now is 01:14 AM.