Additional alarm fob
#1
Scooby Newbie
Thread Starter
Join Date: Feb 2013
Location: Northampton
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I have a 2004 Forester with a single button key which works the alarm/central locking. I would like to source an additional fob to operate the alarm (I know I can get a transponder key cut locally) in case I lose my key. Can I purchase a second hand sigma fob from eBay for example and programme it in? If so what type fob am I looking for, most seem to be ac111's. Thanks
#5
Scooby Newbie
Thread Starter
Join Date: Feb 2013
Location: Northampton
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Ok Folks, I have sorted it. I took the risk and purchased an AC110 sigma fob from EBay. I then programmed it in by using my existing working fob and followed the instructions provided by Sigma Sam.
Arm then disarm the system using good fob, then within 30 secs key into the keypad
*17856*91*N# where N is the number of fobs to be programmed then press each of the fobs briefly in turn (dash led will flash and siren will beep to acknowledge) and that's it..
Arm then disarm the system using good fob, then within 30 secs key into the keypad
*17856*91*N# where N is the number of fobs to be programmed then press each of the fobs briefly in turn (dash led will flash and siren will beep to acknowledge) and that's it..
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
toyney83
General Technical
10
02 October 2015 08:38 PM