jamespedro28

hi, just had a look in the technical archive section,and found a great walk through of removing the inlet manifold on a sri.just wondered whether i would have to remove as much to just get the manifold of .and leave the injectors in place.ie,not having to remove the coil packs and so on..thanks for any help you can give me.

Henrik

iTrader: (5)

The problem is the wiring for the coilpacks etc is bound to the inlet manifold, so the coilpacks will have to come off.

Having said that, the coilpacks take about 1 minute each to remove (at least on new age).

jamespedro28

thanks for that.its just that when i looked through the rite up and the work shop manual.it sounded quite daunting.but know that i have had another look ,and what you have said im a bit more confident.just one more thing is it necessary to drop all the coolant thanks again.