matt31127

hi do thay do a diagnostic scanner for the classic?all i can find say cars after 2001.is the plug differnt?i have a 99 uk turbo thanks

thunder8

iTrader: (1)

I got the same car and the answer is no either main dealer or if you have had a ecutek remap the mapper can use his programme to find out ..

I never used them but they still have the early plugs underneath the steering rack connect them see how many flashes you get then check on here in technical part as there is a sticky from jgm on codes and what they are

hope this helps

jura11

iTrader: (7)

Hi there


If you have at home any laptop have look on this,I've used this on my friend car and working very well


Here is overview of this SW

http://www.subaruoutback.org/forums/...r-ecm-tcu.html

http://developer.berlios.de/projects/freessm/


Its free and you need just supporting cable,I've tried cheap cable from eBay and worked very well on friend car(I've reset his TCU and not sure if will not work too with ABS faults)

On older mode you will need scanner which will read SSM(Subaru Select Monitor),with above posted SW you should be able to read error codes without the problems with cheap OBD cable from eBay

Hope this help

Jura

matt31127

can you get the cable of ebay?

matt31127

is the obd2 the same interface as obd?

Techno-P

iTrader: (1)

you must get the odb2 cable and not odb

matt31127

ok thanks for that