Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Subaru Wrx Noise

Thread Tools
 
Search this Thread
 
Old 09 April 2013 | 07:14 AM
  #1  
seanbaldacchino's Avatar
seanbaldacchino
Thread Starter
Scooby Regular
iTrader: (3)
 
Joined: Feb 2007
Posts: 451
Likes: 0
Default Subaru Wrx Noise

Hi just wanted to get some peoples opinion on a problem i have with my scooby. Its a 53 plate wrx on 79000 miles. Starts and drives fine but when you rev it to 3500 or above it makes a strange sound. Have checked all water and oil which appears totally fine. Wasn't totally convinced it was bottom end as it doesn't sound as a knock its more of a higher pitch noise rather then a bottom end knock.

Any Ideas?
Old 09 April 2013 | 12:46 PM
  #2  
_Viktor's Avatar
_Viktor
Scooby Regular
 
Joined: Nov 2011
Posts: 205
Likes: 0
From: Exiled to Finland
Default

guessing...
my guess, 3500 would be the point your turbo is spooling....

so.. turbo bearing??

Vik
Old 09 April 2013 | 03:10 PM
  #3  
tjmatt's Avatar
tjmatt
Scooby Regular
iTrader: (1)
 
Joined: May 2008
Posts: 415
Likes: 0
Default

Not a lot to go on there, but likely a rattly exhaust heat shield. In particular the noisy one tends to be the up-pipe where the shield rattles because the welds break.
Old 09 April 2013 | 04:39 PM
  #4  
seanbaldacchino's Avatar
seanbaldacchino
Thread Starter
Scooby Regular
iTrader: (3)
 
Joined: Feb 2007
Posts: 451
Likes: 0
Default

That's great info. I'll have a look at both and let you no with an update

Cheers
Old 10 April 2013 | 06:58 AM
  #5  
seanbaldacchino's Avatar
seanbaldacchino
Thread Starter
Scooby Regular
iTrader: (3)
 
Joined: Feb 2007
Posts: 451
Likes: 0
Default

Have checked and its defo the bottom end thats gone. Gonna have to change it for a replacement. What fun
Old 10 April 2013 | 07:51 AM
  #6  
tubbytommy's Avatar
tubbytommy
BANNED
iTrader: (20)
 
Joined: Mar 2010
Posts: 16,950
Likes: 1
From: crawley :)
Default

bottom ends gone...........
Old 11 April 2013 | 12:19 AM
  #7  
seanbaldacchino's Avatar
seanbaldacchino
Thread Starter
Scooby Regular
iTrader: (3)
 
Joined: Feb 2007
Posts: 451
Likes: 0
Default

yep. has anyone change a bottom end of a newage. Just wondered if anyone could offer some advice.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Aeleys
Subaru
17
19 February 2019 05:52 PM
Reshard1977
Subaru Parts
9
13 November 2015 10:23 AM
SunnySubie
Engine Management and ECU Remapping
4
06 October 2015 10:43 PM
Danny0608
Subaru Parts
0
12 September 2015 03:59 PM




All times are GMT +1. The time now is 07:23 PM.