Need FSM or ECU pin Lay out
#1
Scooby Newbie
Thread Starter
Join Date: May 2013
Location: Florida
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Exclamation](https://www.scoobynet.com/images/icons/icon4.gif)
Hi,
I have a EJ208 from a legacy 5MT BE5 according to Japan Subaru. Its twin turbo. The ECU# is 22611 AE831. Im looking for FSM or/and the pin layout on the ECU so I can make a harness. I got in touch with a few people in Japan and new harnesses cost more than I paid for the swap. I cant find harnesses used. I can make a harness as I have the engine harness and part of the front harness. This beast is going in a Super beetle. I have to make harness for the 914 AC and the boxster seats anyway so I dont mind making one for the ECU. I was fortunate enough to get the ECU with factory plugs and about 8 inches of cable. Thanks again for your help.
I have a EJ208 from a legacy 5MT BE5 according to Japan Subaru. Its twin turbo. The ECU# is 22611 AE831. Im looking for FSM or/and the pin layout on the ECU so I can make a harness. I got in touch with a few people in Japan and new harnesses cost more than I paid for the swap. I cant find harnesses used. I can make a harness as I have the engine harness and part of the front harness. This beast is going in a Super beetle. I have to make harness for the 914 AC and the boxster seats anyway so I dont mind making one for the ECU. I was fortunate enough to get the ECU with factory plugs and about 8 inches of cable. Thanks again for your help.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM