Swedge

iTrader: (1)

what version engine is fitted to an x reg uk turbo?

what version will be plug and play basicly

wiggy1

iTrader: (7)

V5/6

STEVEBOXER

As above.

Swedge

iTrader: (1)

Is there any difference on the bottom end between versions? Pistons crank rods etc

mickywrx

iTrader: (29)

UK Turbo's don't have versions!

It's a phase 2 engine, open deck block IIRC.

blackvenom

+1,

Swedge

iTrader: (1)

Ok cheers would a phase 1 block fit instead of a phase 2?

blackvenom

A phase 1 has the smaller 330 grey injectors not the yellow 440s like your car will have. The coils are also in a different location :S . Any engine can be made to fit, a phase 1 engine or a phase 1.5 won't be a straight forward fit, the wiring loom and ecu are different too. Why are you changing your engine? I would suggest fitting a jdm engine, (they have different inlets, different cam set ups) so overall it would be a stronger engine if its backed with service history.

AS Performance

iTrader: (4)

pistons are wrong to have the correct compression when mated to ph2 heads..............