Geometry settings for a new age wagon on bc coilovers please
#1
Scooby Regular
Thread Starter
Join Date: Dec 2009
Location: dorset
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Geometry settings for a new age wagon on bc coilovers please
Hi
Could somebody post up a fast road set up for a new age wagon that's still kind to tyres and retains a bit of comfort . I'm on 18 inch redlines with 225 40 18 falken 452 tyres I've read a lot of post on here but different set ups are a little confusing . A print out would be great .
Cheers guys
Could somebody post up a fast road set up for a new age wagon that's still kind to tyres and retains a bit of comfort . I'm on 18 inch redlines with 225 40 18 falken 452 tyres I've read a lot of post on here but different set ups are a little confusing . A print out would be great .
Cheers guys
#4
Scooby Regular
iTrader: (7)
As per above posted thread,I would add camber bolts,they're don't cost so much and they're worth in my opinion
If yours wagon is lowered please consider Roll centre/bump steer mod
Depends where car/wagon will be mostly used and from this I would go with the setting posted on above thread
In this thread I've posted our settings,which has been spotless like on track or road
Jura
If yours wagon is lowered please consider Roll centre/bump steer mod
Depends where car/wagon will be mostly used and from this I would go with the setting posted on above thread
In this thread I've posted our settings,which has been spotless like on track or road
Jura
#5
Scooby Regular
Thread Starter
Join Date: Dec 2009
Location: dorset
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Jura I took it in at the week end , they could not get the same castor for some reason but the rest is pretty close . I mite get some rear camber bolts so I can fail a bit more on the rear if I need to.
#6
Scooby Regular
iTrader: (7)
Hi there
Castor depends on arms what you are running plus depends on the if you have ALK or on yours you can rotate top mounts,which will give you more castor
Rear camber bolts we have fitted like too front,at front we are must to use just due,with those wide wheels we been unable to run more front camber than -1.3',with camber bolts we can run above -2.00'
Jura
Castor depends on arms what you are running plus depends on the if you have ALK or on yours you can rotate top mounts,which will give you more castor
Rear camber bolts we have fitted like too front,at front we are must to use just due,with those wide wheels we been unable to run more front camber than -1.3',with camber bolts we can run above -2.00'
Jura
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
johnnybon
Wheels And Tyres For Sale
7
25 September 2015 07:49 AM