hi i have a bolt in the rear chasey that is just spinning the nut that is welded inthe chasey has come off what can i do as need to get the part off and the put it back on pleas help me wive this thanks

 

What part is it holding?

 

the rear trailing arm mate

 

Cut the bolt

 

Then I still need to get the nut back on

 

You'll hav a cut bolt to put the nut on

 

Or locate from above, drill hole if required to get to the nut

 

Was thinkg that but as the nut is under the full lines and in the chaser so is going from the top and cuting the top out is this the best way as I don't whant to have a hole in the back of the car mate

 

Do you mean one of these bolts

 

Yes that's the ones mate

 

I've just been surveying the situation and if it was me I would cut /grind offending bolt head off then attack from the top ,
Take rear seats out get yourself a longish punch or screwdriver and put it through the hole underneath and tap it with a hammer , not right through , just so it raises so u can see where you need to drill from the top and if your gonna hit owt
Get a hole saw big enough for you socket to pass through , drill from top , swear at offending nut and throw it , put new nut and bolt through , tighten up , put rubber grommet in hole if you really wish ( I'd just stick any old ****e over tbh)
Chuck seats back in and off yer go

As far as I can see you've no other option I'm afraid

 

Ok thanks will have to see how it gos thanks for your help mate