matthewn

iTrader: (1)

just aquery really i have a m reg impreza import and i have noticed from pics of other engines with my reg they have wot looks like the abs unit in front left part of engine looking from front of engine to windscreen, mine is empty ,am i missing mine or is it somewhere else?

Rob swallow

I've got a 95 import with no abs. Just more to go wrong. Don't press pedal too hard!!!!! lol

myblackwrx

iTrader: (1)

ABS was normally an option in Japan, i had a 93 WRX and it didn't have it so I wouldn't worry

matthewn

iTrader: (1)

cheers , wot boost should i be running mate i have td05,walbro,hks full decat,panel filter,380cc greys,top mount sti, im only boosting 0.6-7 but guy i bought off said i can boost to 1.2bar.is this right mate?

myblackwrx

iTrader: (1)

mmmmm not a chance unless it's been remapped.
Boost for the early cars is about 0.8-0.9bar.

matthewn

iTrader: (1)

im gonna check ecu in a bit wot am i looking for to see if its been chipped etc

myblackwrx

iTrader: (1)

I've just seen your other post about a manual boost controller,I would remove that and see what it boosts to (fuel cut is just over 1bar) so unless he's removed that it will not run 1.2 bar

Bottom right hand side you see a row of solder marks that's where the chip will go

matthewn

iTrader: (1)

so do i just take the tap controller off and join pipes?

myblackwrx

iTrader: (1)

Sorry don't know as I never fitted one,my garage did.
Use the 'search' on here and that may point you in the right direction.

matthewn

iTrader: (1)

ive checked ecu and it a z4 but no chip so i shoul d be boosting around 0.8 bar yes.

JDM_Stig

iTrader: (3)

Z4 should boost 0.9 bar

matthewn

iTrader: (1)

wots the best chip to put in, heard of polar chips, and eclipse performance chips, anyone go any views what i should do.