Hi guys when I bought my scoob just over a year ago it came with a front mount intercooler and hks blow off valve. Now the time has come to change back to recirculating so ive bought an alloy one, my question is probably silly amd obvious but which part of the dump valve goes to the intercooler pipe? On the dump valve I have one part which looks blanked but moves and opens when pushed and the other side opens when the other part moves down, it a classic my00 have bought the pipe work to connect it all back up. Thanks for any help

 

Your dv should have an inlet and a vac line . . thats it. To fit to a fmic you'll need a silicone adapter

 

Oh so I cant put the recuirc where the hks is now on the fmic and run a silicone pipe to where the pipe has been blanked when hks was fitted?

 

Im going to take a guess and say the open side to the inlet by the top of the fmic pipe and the closed side the spring opens going back in to the system where it is blocked off.

 

Have you got a picture of the recirc you've bought?

 

This is what i did with my forge recirc