GB - Bugeye & Blobeye Carbon dressup kits
21 March 2006, 11:14 AM
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Location: www.ayrshirescoobies.com
Posts: 2,079
Likes: 0
Received 0 Likes
on
0 Posts
GB - Bugeye & Blobeye Carbon dressup kits *** PICS ***
***PICS & Prices***
Please see below prices for BUGEYE & BLOBEYE engine dressup kits.
Fusebox cover - £40.00
Relay / Boost control cover - £40.00
Pulley cover - £60.00
Radiator cover - £55.00
Air Intake cover -£110.00
Mirror covers - £60.00 - No picture
If you want them PM me with what you want along with your mobile number to arrange payment.
PAYMENT MUST BE MADE before I can commit to ordering.
The more people order the cheaper it will be!!!
Thanks Ricey
Please see below prices for BUGEYE & BLOBEYE engine dressup kits.
Fusebox cover - £40.00
Relay / Boost control cover - £40.00
Pulley cover - £60.00
Radiator cover - £55.00
Air Intake cover -£110.00
Mirror covers - £60.00 - No picture
If you want them PM me with what you want along with your mobile number to arrange payment.
PAYMENT MUST BE MADE before I can commit to ordering.
The more people order the cheaper it will be!!!
Thanks Ricey
Last edited by Rice Rocket..; 23 March 2006 at 10:36 AM. Reason: Pics added
Trending Topics
15 April 2006, 08:38 PM
#12
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
Warining
I ordered this kit just before the groupbuy - all came Friday
if you are fitting the pully cover make sure you use lots of washers behind it as I fit mine in the dark - came to start the car and the bolt holding on the cover was scraping the belt
had to get a new belt this morning
also my relay cover dosn't fit at all, im interested to see if you guys have the same problem
I ordered this kit just before the groupbuy - all came Friday
if you are fitting the pully cover make sure you use lots of washers behind it as I fit mine in the dark - came to start the car and the bolt holding on the cover was scraping the belt
had to get a new belt this morning
also my relay cover dosn't fit at all, im interested to see if you guys have the same problem
23 April 2006, 03:48 PM
#13
Rich,
I picked mine up from the post office yesterday and fitted it today.
Both parts fit over the existing covers, in the same way as a glove.
I did have to take a small file to the fuse cover were the clip is at the back end, but the pulley cover just cliped ove rthe top of the palstic one.
Did you use new cover as a direct replacement? I thought that at first and put loads of washers on the back (after reading your warning), before I removed it again and tried it over the top. Its a very tight fit, but once on, you cannot see the standard cover and all teh orginal bolts refit well.
I post some pictures later this evening.
I picked mine up from the post office yesterday and fitted it today.
Both parts fit over the existing covers, in the same way as a glove.
I did have to take a small file to the fuse cover were the clip is at the back end, but the pulley cover just cliped ove rthe top of the palstic one.
Did you use new cover as a direct replacement? I thought that at first and put loads of washers on the back (after reading your warning), before I removed it again and tried it over the top. Its a very tight fit, but once on, you cannot see the standard cover and all teh orginal bolts refit well.
I post some pictures later this evening.
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM