Grooved discs and EBC yellow stuff pads!!!!!
#1
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
Grooved discs and EBC yellow stuff pads!!!!!
Hi all,
As some may know, i am about to replace my discs and pads and since i was on the phone i decided to try to get a deal done for us. I have managed to get some great deals based on 10 of us being in on a group buy. So far there are 2 in so only 8 places need filling.
The group buy is for a set of CRN discs front and back with 40 grooves each and EBC Yellow stuff race/road pads. Below is some more info and some prices to get us started, but if there are any special requirements let me know and i will make some phonecalls to see what kind of deal i can get.
Yellowstuff Brake Pads 4000 "R" Series
Prices:
2001-04 Sti 350 pounds delivered
2005-08 Sti 370 pounds delivered
2001-on WRX 255 pounds delivered
Classic will be around 240 pounds but still waiting on confirmation
Bearing in mind that the pads alone are anywhere between 150 and 200 pounds, these prices are pretty good. Also you can opt for less grooves or for drilled and grooved, but i will have to check if this affects cost for you.
Other cars can be included in the group buy, just let me know what you need
Ian
MINTEX M1144 C-TECH PADS NOW ALSO AVAILABLE IN THE GROUP BUY, PRICES TO FOLLOW
As some may know, i am about to replace my discs and pads and since i was on the phone i decided to try to get a deal done for us. I have managed to get some great deals based on 10 of us being in on a group buy. So far there are 2 in so only 8 places need filling.
The group buy is for a set of CRN discs front and back with 40 grooves each and EBC Yellow stuff race/road pads. Below is some more info and some prices to get us started, but if there are any special requirements let me know and i will make some phonecalls to see what kind of deal i can get.
Yellowstuff Brake Pads 4000 "R" Series
Prices:
2001-04 Sti 350 pounds delivered
2005-08 Sti 370 pounds delivered
2001-on WRX 255 pounds delivered
Classic will be around 240 pounds but still waiting on confirmation
Bearing in mind that the pads alone are anywhere between 150 and 200 pounds, these prices are pretty good. Also you can opt for less grooves or for drilled and grooved, but i will have to check if this affects cost for you.
Other cars can be included in the group buy, just let me know what you need
Ian
MINTEX M1144 C-TECH PADS NOW ALSO AVAILABLE IN THE GROUP BUY, PRICES TO FOLLOW
Last edited by evil.soup; 09 July 2009 at 09:12 AM. Reason: EDIT
#2
EBC pads get a bit of bashing on here, But I'm running a set in my ksport 8 pot set up and these work fine, Much better than the Pads that came with as standard.
Recently did a track day with these, no fade what so ever and required very little warming up
Recently did a track day with these, no fade what so ever and required very little warming up
#5
Trending Topics
#8
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
I have given CRN a call to get some answers to the above and should have a reply tomorrow for you all.
Since there is some interest i think we should get a list going. Add your name if you are 100% interested and i will PM you details of how to get your discount
1.Evil.soup - Sti discs and pads
2.Viggs - Europa discs and pads
3.
4.
5.
6.
7.
8.
9.
10.
Since there is some interest i think we should get a list going. Add your name if you are 100% interested and i will PM you details of how to get your discount
1.Evil.soup - Sti discs and pads
2.Viggs - Europa discs and pads
3.
4.
5.
6.
7.
8.
9.
10.
#9
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
Brembo front and WRX rear with Yellow stuff pads will be £320 and rear only for a WRX i cannot remember as i have left the details in work, sorry!
I am waiting on an e-mail with full costs and details for various applications including the above so i will post it up as soon as i get it.
I am away for just over a week so post any questions you have and i will answer them ASAP
I am waiting on an e-mail with full costs and details for various applications including the above so i will post it up as soon as i get it.
I am away for just over a week so post any questions you have and i will answer them ASAP
#13
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
Ye, still going, i have been away thats all
To answer bugeye_scoob, rears only with yellowstuff pads would be £150.
Ok, i have now also got Mintex M1144 C-tech pads in the group buy, but as yet i have no prices, although i have been told they should be a little cheaper
Any comments or opinions on these pads are welcome, i do value your opinions/experience!
What are your needs lads as interest is growing and i need to get my own discs/pads replaced ASAP?
Thanks
Ian
To answer bugeye_scoob, rears only with yellowstuff pads would be £150.
Ok, i have now also got Mintex M1144 C-tech pads in the group buy, but as yet i have no prices, although i have been told they should be a little cheaper
Any comments or opinions on these pads are welcome, i do value your opinions/experience!
What are your needs lads as interest is growing and i need to get my own discs/pads replaced ASAP?
Thanks
Ian
#19
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
Below is a list of disc prices to help work out your needs and costs etc.
Discs:
1994-1998 (unless states Subaru or brembo on the callipers)
F- 277mm £60
R- 266mm Vented £60
R 266mm Solid £60
1998-2001 (Classic shape, should be Subaru engraved 4 pot callipers.)
F- 295mm £60
R- 266mm Vented £60
R 266mm Solid £60
2001 (bug eye/wrx NOT STI)
F 295mm £60
R- 290mm £85
2001-2006 (STI/Brembo/WRX)
F- 326mm £115
R 316mm £115
Specific pads must be found at :: EBC Brakes Direct Limited :: and then send us the ‘DP’ part number to us so that we can get prices for those pads. There is too many too list.
Liam
Highlander, they probably cant get discs for the P1 other than the Prodrive discs, something to do with the size, but he is still looking into it.
MrJ, shipping to Sweden is £30.
If you find the pad numbers from the above and let me know and i will get costs for you
Still waiting on Mintex pad prices.
Ian
Discs:
1994-1998 (unless states Subaru or brembo on the callipers)
F- 277mm £60
R- 266mm Vented £60
R 266mm Solid £60
1998-2001 (Classic shape, should be Subaru engraved 4 pot callipers.)
F- 295mm £60
R- 266mm Vented £60
R 266mm Solid £60
2001 (bug eye/wrx NOT STI)
F 295mm £60
R- 290mm £85
2001-2006 (STI/Brembo/WRX)
F- 326mm £115
R 316mm £115
Specific pads must be found at :: EBC Brakes Direct Limited :: and then send us the ‘DP’ part number to us so that we can get prices for those pads. There is too many too list.
Liam
Highlander, they probably cant get discs for the P1 other than the Prodrive discs, something to do with the size, but he is still looking into it.
MrJ, shipping to Sweden is £30.
If you find the pad numbers from the above and let me know and i will get costs for you
Still waiting on Mintex pad prices.
Ian
#20
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
BTTT
Next week my main contact at CRN will be back from holiday so i will be looking to start getting orders in, so if you are interested, please let me know. If you have found a better deal, fill me in and i will see if i can improve on it for you.
Ian
Next week my main contact at CRN will be back from holiday so i will be looking to start getting orders in, so if you are interested, please let me know. If you have found a better deal, fill me in and i will see if i can improve on it for you.
Ian
#22
Hi Mate, I have looked on their Website & the
"Impreza STI RA (98-01) Grooved Discs & Redstuff Pads (F&R)
[0000-PKSB04] £279.99 "
Will fit my P1..
How much cheaper will i get em through this groupbuy mate??
Cheers
"Impreza STI RA (98-01) Grooved Discs & Redstuff Pads (F&R)
[0000-PKSB04] £279.99 "
Will fit my P1..
How much cheaper will i get em through this groupbuy mate??
Cheers
#23
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
Ian
#26
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
Ok!
I have spoken to my contact and given your requirements and he is ready to take orders, he said he will get them produced straight away once orders are in as we have been waiting. I have asked him to put together costs for sets with mintex and EBC pads so that you have a choice and i have also got him to include zinc coating at an extra cost of £15 for 4 discs or £7.50 for 2 if you want it. He is re-calculating costs as he thinks he may be able to get them a little cheaper again for us
To place your orders you can call 01246 55 99 33 and ask for Olly. To get the discounted price tell him you are calling about the Impreza group buy and give him my name, Ian. Confirm your requirements with him and that should be that
Highlander, he can supply the P1 discs and pads, just give him a call and he will give you an exact cost based on your requirements, such as pad type, zinc coating etc.
If you place orders please let me know and if there are any issues post it up and i will get on it for you.
Ian
I have spoken to my contact and given your requirements and he is ready to take orders, he said he will get them produced straight away once orders are in as we have been waiting. I have asked him to put together costs for sets with mintex and EBC pads so that you have a choice and i have also got him to include zinc coating at an extra cost of £15 for 4 discs or £7.50 for 2 if you want it. He is re-calculating costs as he thinks he may be able to get them a little cheaper again for us
To place your orders you can call 01246 55 99 33 and ask for Olly. To get the discounted price tell him you are calling about the Impreza group buy and give him my name, Ian. Confirm your requirements with him and that should be that
Highlander, he can supply the P1 discs and pads, just give him a call and he will give you an exact cost based on your requirements, such as pad type, zinc coating etc.
If you place orders please let me know and if there are any issues post it up and i will get on it for you.
Ian
#29
Ok!
I have spoken to my contact and given your requirements and he is ready to take orders, he said he will get them produced straight away once orders are in as we have been waiting. I have asked him to put together costs for sets with mintex and EBC pads so that you have a choice and i have also got him to include zinc coating at an extra cost of £15 for 4 discs or £7.50 for 2 if you want it. He is re-calculating costs as he thinks he may be able to get them a little cheaper again for us
To place your orders you can call 01246 55 99 33 and ask for Olly. To get the discounted price tell him you are calling about the Impreza group buy and give him my name, Ian. Confirm your requirements with him and that should be that
Highlander, he can supply the P1 discs and pads, just give him a call and he will give you an exact cost based on your requirements, such as pad type, zinc coating etc.
If you place orders please let me know and if there are any issues post it up and i will get on it for you.
Ian
I have spoken to my contact and given your requirements and he is ready to take orders, he said he will get them produced straight away once orders are in as we have been waiting. I have asked him to put together costs for sets with mintex and EBC pads so that you have a choice and i have also got him to include zinc coating at an extra cost of £15 for 4 discs or £7.50 for 2 if you want it. He is re-calculating costs as he thinks he may be able to get them a little cheaper again for us
To place your orders you can call 01246 55 99 33 and ask for Olly. To get the discounted price tell him you are calling about the Impreza group buy and give him my name, Ian. Confirm your requirements with him and that should be that
Highlander, he can supply the P1 discs and pads, just give him a call and he will give you an exact cost based on your requirements, such as pad type, zinc coating etc.
If you place orders please let me know and if there are any issues post it up and i will get on it for you.
Ian
Would be much easier for my as I have problems calling to UK...
#30
Thread Starter
Scooby Senior
iTrader: (1)
Joined: Aug 2006
Posts: 2,571
Likes: 12
From: At home counting pennies!!!
I dont have a direct e-mail for Olly, but you can contact CRN via the below address and in turn contact Olly.
dean@rousie.co.uk <dean@rousie.co.uk>
As before, let me know how it goes and if you have any issues dont hesitate to contact me and i will make some calls for you
dean@rousie.co.uk <dean@rousie.co.uk>
As before, let me know how it goes and if you have any issues dont hesitate to contact me and i will make some calls for you