Removal of MY03 STi8 Front door Cards (Piccys)
#5
Scooby Regular
Thread Starter
Join Date: Jun 2000
Posts: 13,735
Likes: 0
Received 0 Likes
on
0 Posts
This faq!
In fact, Iain did this superb section. My apologies, I thought the 8 might be different Iain!
Cheers,
Nick.
In fact, Iain did this superb section. My apologies, I thought the 8 might be different Iain!
Cheers,
Nick.
#7
Scooby Regular
Join Date: Jun 2000
Location: Cumbria
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
I am in the process of fitting some component speakers to the front doors of my STi8,
It is pretty straight forward to get the door card off, i thought i would show you some piccys of what to do.
Undo the screw in the door handle
Lift out the plastic thingy with all the window controls on and remove the larger screw on the top
Pull off the handle surround, taking care not to marke the trim.
gently remove the plastic corner thingy by the wing mirror
pull on the door card at the bottom of the door to undo the clips and lift off the door card to reveal the speakers
Main speaker
Tweeter.
Now once i had done this, it revealed a differnet set-up to the MY01-02 setup where you can modify the main speaker mounting bracket to fit the after market speaker. BUGGER!!!
Off to B&Q to get some MDF,
I will post later to let you know how i get on
Phil G
WCSR
[Edited by philgr - 3/7/2003 12:47:05 PM]
It is pretty straight forward to get the door card off, i thought i would show you some piccys of what to do.
Undo the screw in the door handle
Lift out the plastic thingy with all the window controls on and remove the larger screw on the top
Pull off the handle surround, taking care not to marke the trim.
gently remove the plastic corner thingy by the wing mirror
pull on the door card at the bottom of the door to undo the clips and lift off the door card to reveal the speakers
Main speaker
Tweeter.
Now once i had done this, it revealed a differnet set-up to the MY01-02 setup where you can modify the main speaker mounting bracket to fit the after market speaker. BUGGER!!!
Off to B&Q to get some MDF,
I will post later to let you know how i get on
Phil G
WCSR
[Edited by philgr - 3/7/2003 12:47:05 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM