Panasonic audio wiring
#1
blue is most likely remote amp on/electric aerial. Check it with a voltmeter when the unit's switched on.
Standard ISO speaker colouring is:
LF+: white
LF-: white/black
RF+: grey
RF-: grey/black
LR+: green
LR-: green/black
RR+: purple
RR-: purple black
bet it doesn't match that!
Standard ISO speaker colouring is:
LF+: white
LF-: white/black
RF+: grey
RF-: grey/black
LR+: green
LR-: green/black
RR+: purple
RR-: purple black
bet it doesn't match that!
#2
Scooby Regular
Yep, it is the Aerial. Just found a wiring diagram at Panasonic UK.
You are spot on with the speakers I think
Just need to find out how it all fits to a 205 now. Is it worth keeping the ISO connectors, or just creating my own loom?
You are spot on with the speakers I think
Just need to find out how it all fits to a 205 now. Is it worth keeping the ISO connectors, or just creating my own loom?
#3
What's the Panny terminated with? If it's bare or bullets, I'd buy an ISO/bare or ISO/Japan(bullet) harness from Hellfords. I'd never cut the car's loom. If the car presents an ISO, connect something to it and work on that.
#4
Scooby Regular
It terminates in the ISO connectors. Brown for speakers, black for power etc.
Think I may just get this:
The red thing connects to the standard Pug plug, then I presume the ISO plugs fit straight into the 2 outlets above?
Think I may just get this:
The red thing connects to the standard Pug plug, then I presume the ISO plugs fit straight into the 2 outlets above?
#6
Scooby Regular
I've managed to borrow a head unit from my sister as she no longer has a car for it to go in. It is a Panasonic CQ-FX35LEN which is a nice looking unit and will go into my Pug 205.
Problem is there are no instructions with it, as the guy who fitted it threw them.
The wiring is in 2 parts, speaker wires, and power wires.
power wires include red for Acc, yellow for 15A 12V battery, then blue and black. I presume black is ground, so what is the blue wire?
Anyone know which speaker wiers are for which speaker?
[Edited by Dream Weaver - 3/10/2003 10:14:56 AM]
Problem is there are no instructions with it, as the guy who fitted it threw them.
The wiring is in 2 parts, speaker wires, and power wires.
power wires include red for Acc, yellow for 15A 12V battery, then blue and black. I presume black is ground, so what is the blue wire?
Anyone know which speaker wiers are for which speaker?
[Edited by Dream Weaver - 3/10/2003 10:14:56 AM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM