Spacer Question
28 March 2003 | 01:04 PM
#1
Thread Starter
Scooby Regular
Joined: Jul 2002
Posts: 261
Likes: 0
I'm interested in comments about the types of spacer used to fit larger spkrs in front of my MY02. Alpine HU has nearly finished off the std spkrs now.
Should I try to build my own out of MDF or do the Vauxhall Corsa plastic ones work well?
Nige
Should I try to build my own out of MDF or do the Vauxhall Corsa plastic ones work well?
Nige
28 March 2003 | 11:20 PM
#2
Scooby Regular
Joined: Dec 2001
Posts: 238
Likes: 0
Nigel - Don't use plastic! It'll cause more problems than you have at the moment!
Get a bit of MDF and a jigsaw - they don't have to be perfect, as you're not going to see them. If you've got some room for an angle - this might give you some ideas:
OK, those were kick panels, but you get the idea!
Apologies for this tiny picture, but this is all you really want to do:
[Edited by MRK_IV - 3/28/2003 11:24:46 PM]
Get a bit of MDF and a jigsaw - they don't have to be perfect, as you're not going to see them. If you've got some room for an angle - this might give you some ideas:
OK, those were kick panels, but you get the idea!
Apologies for this tiny picture, but this is all you really want to do:
[Edited by MRK_IV - 3/28/2003 11:24:46 PM]
29 March 2003 | 11:14 AM
#3
Scooby Regular
Joined: Jun 2000
Posts: 13,735
Likes: 0
I mutilated the existing pods and chucked a piece of 12mm MDF on the front of 'em in my old install - Chrome's now using them 
Might try and put more effort into the next one. Will have a look to see how hard it will be to make a few up whilst I'm doing one...
Might try and put more effort into the next one. Will have a look to see how hard it will be to make a few up whilst I'm doing one...
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM