HELP.

I HAVE PUT A NEW HEAD UNIT IN MY 03 WRX BUT NOW DO NOT HAVE ANY RADIO RECEPTION.

THE MANUAL SAYS CONNECT THE AERIAL POWER SUPPLY FROM THE HEAD UNIT TO THE REAR SCREEN AERIAL SUPPLY BUT I DONT KNOW WHERE IT IS .. CAN ANYONE HELP?

[Edited by NICKMERRY72 - 12/4/2003 8:51:07 PM]

 

Seem to remember other posts stating that there is a blue (or blue and white) cable in the head unit harness that is usually supplied disconnected.

I'm sure Chiark can answer this question

PJA

 

We have an ICE section ya know

I'm assuming you're using the Autoleads 2-44-4 adaptor? If so, the loom contains the remote power connection so you just need to make sure your head unit wiring loom has got the remote turn on wired in. It's normally a blue or blue/white lead and may have a bullet connector that you need to connect to the ISO block.

To be clear, it'll be between your head unit and the autoleads adaptor that you need to connect something.

 

See also the following link (sorry don't know how to make it clicky !!)

www.imprezawrxsti.com/postnuke/index.php?name=PNphpBB2&file=viewtopic&t=4840


PJA