Cabling Front Door Speakers
#1
Guys..
Whats the most commmon method for cabling the door speakers..
1. Use existing cable routing
2. Drill new openings, grommet and route..
Bear in mind that each door will required 2 runs of 14gauge cable. (tweeter and woofer - this is a infinty 605CS install)
cheers
Whats the most commmon method for cabling the door speakers..
1. Use existing cable routing
2. Drill new openings, grommet and route..
Bear in mind that each door will required 2 runs of 14gauge cable. (tweeter and woofer - this is a infinty 605CS install)
cheers
#2
Not sure about the most common method, but it's quite possible to
1) route a pair of 'sensible' (or is it capable?) gauge cable through the current openeing, whilest
2) constantly removing thin layers of skin.
(1) & (2) go hand-in-hand, as usual.
It's a bit of a struggle, but grease up & using a coat hanger makes it all a lot easier!
1) route a pair of 'sensible' (or is it capable?) gauge cable through the current openeing, whilest
2) constantly removing thin layers of skin.
(1) & (2) go hand-in-hand, as usual.
It's a bit of a struggle, but grease up & using a coat hanger makes it all a lot easier!
#3
Scooby Regular
Joined: May 2001
Posts: 3,301
Likes: 0
From: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Easy to do, took me about 20 mins in the rain yesterday to insert my new phoenix gold cable thru the existing rubber grommet, no probs
#4
Moderator
iTrader: (5)
Joined: Nov 2001
Posts: 17,864
Likes: 0
From: Not all those who wander are lost
I squeezed 3 runs of 14 gauge cable through the existing door grommets. But not without removing most of the skin from my hands
A bit of Fairy Liquid seems to help
Mine was also a 605 install, but I mounted the crossover on the kickpanels so needed to return the cables back into the cabin.
A bit of Fairy Liquid seems to help
Mine was also a 605 install, but I mounted the crossover on the kickpanels so needed to return the cables back into the cabin.
#7
At the very worst you could use electical tape to loom 'em up. That's what I've done, and there's no evidence of damage to the tape after two years...
Of course, it's easier to do this BEFORE you install 'em
And fairy liquid really does help a lot!
Of course, it's easier to do this BEFORE you install 'em
And fairy liquid really does help a lot!
Trending Topics
#11
Dunk, it affects sound quality. The acidity of the lemon causes electron proflugation around the grommet leading to eddies in the space-time continuum, marginally changing the high frequency response curves.
I'm sure Dr Banks will confirm all this and possibly more.
DON'T USE LEMON FLAVOUR WASHING UP LIQUID OF ANY BRAND.
I'm sure Dr Banks will confirm all this and possibly more.
DON'T USE LEMON FLAVOUR WASHING UP LIQUID OF ANY BRAND.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM