Needles on startup
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Sep 2008
Location: South Coast
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Needles on startup
Hi, I noticed on youtube a STI being started and the sti logo lights up, then all the needles shoot to the top. Thought it looked sweet, noticed that mine doesnt do it and according to the manual it only does it in Australian models. Anyone know if us Brits can have this feature?
Ta.
Ta.
Trending Topics
#14
Scooby Regular
Join Date: Dec 2007
Location: North Wales/Chester
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
#20
#22
#25
#26
Scooby Senior
OK, finally remembered to bring in the handbook. Although my car is a JDM, Litcho included a handbook for the USDM cars.
The "sequential illumination" of the instruments can be toggled on or off as follows:
With the ignition in the "on" position (but not actually in the middle of doing the sweep), press the trip **** while turning the Rev setting **** clockwise of anticlockwise. The buzzer will sound briefly, and the ambient temperature guage will show "ON" (sequential illumination enabled) or "--" (not).
Return the rev setting **** to its original position to complete the setting process. The buzzer will sound briefly. A few seconds later the ambient temperature guage will return to showing the temperature.
No doubt this will only work if you have dials like those shown in post #9
Good luck
The "sequential illumination" of the instruments can be toggled on or off as follows:
With the ignition in the "on" position (but not actually in the middle of doing the sweep), press the trip **** while turning the Rev setting **** clockwise of anticlockwise. The buzzer will sound briefly, and the ambient temperature guage will show "ON" (sequential illumination enabled) or "--" (not).
Return the rev setting **** to its original position to complete the setting process. The buzzer will sound briefly. A few seconds later the ambient temperature guage will return to showing the temperature.
No doubt this will only work if you have dials like those shown in post #9
Good luck
#30
OK, finally remembered to bring in the handbook. Although my car is a JDM, Litcho included a handbook for the USDM cars.
The "sequential illumination" of the instruments can be toggled on or off as follows:
With the ignition in the "on" position (but not actually in the middle of doing the sweep), press the trip **** while turning the Rev setting **** clockwise of anticlockwise. The buzzer will sound briefly, and the ambient temperature guage will show "ON" (sequential illumination enabled) or "--" (not).
Return the rev setting **** to its original position to complete the setting process. The buzzer will sound briefly. A few seconds later the ambient temperature guage will return to showing the temperature.
No doubt this will only work if you have dials like those shown in post #9
Good luck
The "sequential illumination" of the instruments can be toggled on or off as follows:
With the ignition in the "on" position (but not actually in the middle of doing the sweep), press the trip **** while turning the Rev setting **** clockwise of anticlockwise. The buzzer will sound briefly, and the ambient temperature guage will show "ON" (sequential illumination enabled) or "--" (not).
Return the rev setting **** to its original position to complete the setting process. The buzzer will sound briefly. A few seconds later the ambient temperature guage will return to showing the temperature.
No doubt this will only work if you have dials like those shown in post #9
Good luck
I will give it a go on friday when Ive got some spare time!!
JGT