Krade

Fantasic thanks very much bits'n'pieces and 2000 sport



[Edited by Krade - 10/2/2003 4:42:37 PM]

Krade

mods can you leave for a while plz? Posted in lights and 3 views in as many hours

I did a search of the last year looking for the answer but didnt find what I am looking for

I have fitted morrets to my car and when Wiring up I have 4 wires, the earth and + are pretty obvious but what isn't that obvious is the two blue wires.

I'm guessing on of these is for the full beam, but which wire is which? I have a lightish blue wire and a darkerblue wire with a scotch clip on it.

What does the fourth wire do? as you probably guessed I dont have any fitting instructions or manual and the morette site isnt working.
Ta in advance.

bits'n'pieces

http://www.555club.com/articles/article40/article40.htm


if this doesnt help you is knackered !!

2000 sport

iTrader: (1)

Looking at the back of the drivers headlight you will see more wires than the passenger light. This is the relay. Coming from the relay you should have one RED wire coming from it, this wire should be attached to the battery via a fuse.

There should also be a yellow wire with a scotch lock attached. This is the main beam feed. It connects into the wire on your original 3 pin plug wires.

Next there are two blue wires, they are both together, one is short and the other long. The long one goes all the way over to the other light and connects to the one of the two grey wires coming of the high beam light. The shorter one then does the same but on the drivers side light. The remaining wires on both lights are earths and can be connected to earth.

The next two wires are for the sidelight and plug into the existing sidelight plug. Then you just need to plug it all up!

hope that is of some help mate...

M0NEY

wible sorted it already peter. he came round mine

Krade

I know just had a chat on the phone.
Should be able to finish mine off mon tues