hi guys
does anyone know if there is a guide to fitting these on here, as i understand they need to be modded to be legal here in the UK
any help greatly appreciated cheers
dave

 

If you mean STI rear lights for a Classic then its a simple exchange for the standard lamps; if you have a UK car you will need to fit a foglamp of course.

Simon

 

I need to know this to. I should have mine by start of next week.

I've recently seen a post where someone drilled a large hole to fit an extra light into the cluster to cater for a fog light. Might have been on P1 forum actually. I'll have a look

 

You can remove the right hand side reverse light and put the bulb holder from your foglight with a 21w red bulb in,depends if you can manage with 1 reverse light.(passed mot like it)I used a silvatec bulb so you couldnt see the red through the reverse light when its off.

 

they dont check reverse lights during mot, so thats not an issue

 

No the issue was that its not as bright as a proper fog light,but it still passes the mot ok-just didnt want the red bulb showing through a white lens so got a silvatec one.(nothing to do with reverse lights and mot)

 

thats wot im about to dave with mine
lose a reverse light but gain a fog light.

someone mentioned to me get some red reflective plastic and stick it over the white for MOT time even though my bulb is red ????????????????

did u do this ?

ps,sorry 4 hijacking ;-)

 

If you look at the STI light compared to a UK light theres a blank on the STI where the fog should go. Drill a 25mm hole, clean it up and use the fog light holder and UK loom and hey presto fog light but no other lights lost and using OE loom.