FRONT SIDELIGHT BULB REPLACEMENT ON CLASSIC
#1
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N Yorks
Posts: 663
Likes: 0
Received 0 Likes
on
0 Posts
FRONT SIDELIGHT BULB REPLACEMENT ON CLASSIC
I know its a basic query, and I am mechanically competent, but how do you get into these. Seen the screw fixing to top of the headlamp, but I must be missing another screw or clip somewhere as it wont come out. Don't want to force it to find out where it breaks, just thought I would ask first! Cheers, Daz
Last edited by dazc; 07 February 2005 at 12:12 PM.
#2
Scooby Regular
Undo the screw and push from behind the light towards the front of the car. There's a plastic ball & socket joint behind the lense that hols it in place.
You need to give it some force, but be careful not to break the plastic joint.
Stefan
You need to give it some force, but be careful not to break the plastic joint.
Stefan
#6
Scooby Regular
The drivers side is notoriosuly sticky compared to the passengers - don't know why
I found it much easier to push it out rather than pulling it. Watch you don't strip the wires on the wing.
Stefan
I found it much easier to push it out rather than pulling it. Watch you don't strip the wires on the wing.
Stefan
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM