Bi-Xenon Projectors
04 September 2007, 08:09 AM
#1
Bi-Xenon Projectors
My next project.......
Retro fitting these babies into my stock MY00 Crystals
I've also managed to get hold of some projectors from a Mini, these may end in the fog light location.
CupraJake - where did you managed to get hold of the H4 plug from?........ (ya PM box is full)
Retro fitting these babies into my stock MY00 Crystals
I've also managed to get hold of some projectors from a Mini, these may end in the fog light location.
CupraJake - where did you managed to get hold of the H4 plug from?........ (ya PM box is full)
04 September 2007, 10:00 AM
#2
i had mine from when i had a cheap set of hid, bg mistake.
you can always use spade connectors to go into the fctory harness.
it looks like the ignitor/ballast is all part of one unit, there you may struggle due to the depth of the unit, to actuall fit it in, id do a test run on an old pair of lights first, also be careful when removing the glass it will break easy, heat it up good and propper then cut the glue first
jake
you can always use spade connectors to go into the fctory harness.
it looks like the ignitor/ballast is all part of one unit, there you may struggle due to the depth of the unit, to actuall fit it in, id do a test run on an old pair of lights first, also be careful when removing the glass it will break easy, heat it up good and propper then cut the glue first
jake
05 September 2007, 06:56 PM
#4
Scooby Regular
Join Date: Apr 2003
Location: South Bucks
Posts: 3,213
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post