Fitting folding mirrors to UK classic
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: Kent
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Fitting folding mirrors to UK classic
Has anyone got a decent guide for fitting folding door mirrors to a UK classic?
In particular, but not necessarily limited to, the extra wiring that is required (I think I'm right in saying that I need an extra wire between the switch and the mirror to make use of the folding function)?
Thanks for your help.
In particular, but not necessarily limited to, the extra wiring that is required (I think I'm right in saying that I need an extra wire between the switch and the mirror to make use of the folding function)?
Thanks for your help.
#2
Scooby Regular
iTrader: (26)
This ones a bit too much I think:
NorthUrsalia.com: STi Version 6 Power Folding Mirrors
heres the thread its on:https://www.scoobynet.com/lighting-o...x-mirrors.html
Scoobynet users KIPS done a guide, which I think is part covered in that.
Only saying that as I run a couple of wires from the door loom to the switch.
NorthUrsalia.com: STi Version 6 Power Folding Mirrors
heres the thread its on:https://www.scoobynet.com/lighting-o...x-mirrors.html
Scoobynet users KIPS done a guide, which I think is part covered in that.
Only saying that as I run a couple of wires from the door loom to the switch.
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: Kent
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
This ones a bit too much I think:
NorthUrsalia.com: STi Version 6 Power Folding Mirrors
heres the thread its on:https://www.scoobynet.com/lighting-o...x-mirrors.html
Scoobynet users KIPS done a guide, which I think is part covered in that.
Only saying that as I run a couple of wires from the door loom to the switch.
NorthUrsalia.com: STi Version 6 Power Folding Mirrors
heres the thread its on:https://www.scoobynet.com/lighting-o...x-mirrors.html
Scoobynet users KIPS done a guide, which I think is part covered in that.
Only saying that as I run a couple of wires from the door loom to the switch.
I don't think I have the time or ability to do that
#5
Scooby Regular
iTrader: (19)
Join Date: Nov 2005
Location: notts
Posts: 2,770
Likes: 0
Received 0 Likes
on
0 Posts
its a lot easyer than that mate.
i did this a while ago. if you look at the switch, theres 2 wires (carnt remember the colures, but there the end ones). just conect then to the exstra 2 on the mirrors mate.
thats it.
you can just use normal 5/10 amp cable if need be.
i did this a while ago. if you look at the switch, theres 2 wires (carnt remember the colures, but there the end ones). just conect then to the exstra 2 on the mirrors mate.
thats it.
you can just use normal 5/10 amp cable if need be.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
stonejedi
Wheels And Tyres For Sale
7
21 September 2015 08:54 PM
KOEScoob
ScoobyNet General
6
17 September 2015 03:51 PM