Testing the Coil Packs
#1
Scooby Regular
Thread Starter
Join Date: Mar 2007
Location: Cheltenham
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Hello there, wanted to check the coil packs, i suspect one cylinder not firing properly, the primary coil resistance should be 0.7 ohms measured between the 2 supply wires, the secondary coil should be 13.8 k ohms measured between the supply wire 1 and the spark plug contact (according to the manual), primary coil is ok , i can not get any reading for the secondary coil ( on any of them ) , the wiring diagram is not clear is the secondary coil grounded through the primary coil or through the bolt that holds the coil in place.
![Confused](https://www.scoobynet.com/images/smilies/confused.gif)
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM