Non existant radio reception, 05' sti
#1
Scooby Newbie
Thread Starter
Join Date: Apr 2010
Location: West of scotland
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
My "new" motors radio reception is not working. i took out the head unit (std subaru ) to check the aerial connection, it is all ok, there is a very minor amount of reception on say radio 1 with the aerial connector in place, but none at all when the aerial is disconnected. Any pointers plesae?
cheers Sandy
cheers Sandy
#6
Scooby Regular
iTrader: (23)
Join Date: Jul 2008
Location: In the fast lane
Posts: 3,458
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I have the same problem with my own 05 car. The radio wasn't working when I bought it. It has a JVC KW-AVX800 head unit.
Checked through all the wiring, had the A pillar cover off to check the aerial amp, can't get it to work no matter what I do.
Checked through all the wiring, had the A pillar cover off to check the aerial amp, can't get it to work no matter what I do.
#7
Scooby Regular
iTrader: (1)
Join Date: May 2014
Location: sussex
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Or failing that just fit a 12v aeriel booster yourself ,, ought to work i guess
Last edited by scoobyskool; 06 January 2015 at 11:44 AM.
Trending Topics
#10
BANNED
iTrader: (4)
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
the amplifier is in the rear window, when an aftermarket stereo is fitted you need to connect the blue 12v accessory wire from the stereo to the white wire on the cars loom,this provides 12v to the aerial amplifier when the stereo is on an powers the amplifier so the radio works.
Last edited by fat-thomas; 06 January 2015 at 12:23 PM.
#11
Scooby Regular
iTrader: (23)
Join Date: Jul 2008
Location: In the fast lane
Posts: 3,458
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
the amplifier is in the rear window, when an aftermarket stereo is fitted you need to connect the blue 12v accessory wire from the stereo to the white wire on the cars loom,this provides 12v to the aerial amplifier when the stereo is on an powers the amplifier so the radio works.
I don't remember seeing a white wire in the loom. Need to have another look.
#12
BANNED
iTrader: (4)
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
the amplifier is placed near the water tank for the ic spray.
http://ae64.com/WRX-pinout.htm
see the above link, basically the aftermarket stereo will have a 12v accessory wire that will supply the power to aerial amplifier, depending on stereo you may need to activate the power to the blue wire, its the one used to power amps etc.