catch can/breather mods pics request
11 April 2006, 04:39 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2005
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
catch can/breather mods pics request
As above as have made myown inlet pipe without breathers/removed carbon can/re-located power steering and self vented the idle air valve (will upload pics when finished) just looking for ideas on what to do with the breathers i know some of you have done this already thinking of just vta for breathers???
11 April 2006, 08:57 PM
#2
I would be very interested in seeing these pics of the home made inlet.
As for the breather mod pics, I think its a little diffcult to take pics with any meaning. I have taken my pipes that normaly vent into the inlet and tee'd them together. I now use a modified cycle water bottle in the inner wing, filled with wire wool as the catch tank. Hope this helps a little.
Also, check out Graham's (911's) thread in projects. There is some good info in there I think.
As for the breather mod pics, I think its a little diffcult to take pics with any meaning. I have taken my pipes that normaly vent into the inlet and tee'd them together. I now use a modified cycle water bottle in the inner wing, filled with wire wool as the catch tank. Hope this helps a little.
Also, check out Graham's (911's) thread in projects. There is some good info in there I think.
11 April 2006, 09:13 PM
#3
Scooby Regular
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM