18's on my Type RA
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jan 2008
Location: Scotland
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
18's on my Type RA
Had a set of 18" alloys lying in the garage so decided to give them a quick paint and try them out on my RA .Suit the car but i feel it handels better with 16" wheels,here's a couple pics after i gave it a much needed wash...
Pics not too clear due to dull weather -typical.
Pics not too clear due to dull weather -typical.
Trending Topics
#17
Scooby Regular
iTrader: (11)
Does it ruin your 'image' in SN as the good samaritan?
What story have I changed?
The fact is, 2 of the wheels were bent (had flat spots) which must have happened when your car fell in a pot hole. You could even see that with a bare eye when trying to balance the wheel!
And if you didn't damage them yourself at least get them checked when buying them and selling them again and don't advertise them as straight! Moron!
I want to warn other SN users not to buy anything from you and have every right to do so since the minimum one would expect is an apology and a partial refund for the damaged ones but you never accepted any responsibility for this.
#18
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jan 2008
Location: Scotland
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
I still say there was nothing wrong with the wheels as i ran them on my bugeye with no issues and as i said before how do i know they weren't damaged enroute to Sweden or that you didn't run into a pothole as it's your word against mine.If i had noticed or knew that there was any problems with the alloys i wouldn't have sold them -end of. Now your back on here slagging me off and bsaically wasting my time so
#19
Scooby Regular
iTrader: (11)
I still say there was nothing wrong with the wheels as i ran them on my bugeye with no issues and as i said before how do i know they weren't damaged enroute to Sweden or that you didn't run into a pothole as it's your word against mine.If i had noticed or knew that there was any problems with the alloys i wouldn't have sold them -end of. Now your back on here slagging me off and bsaically wasting my time so
The first thing I did when I got the wheels is to have them balanced before putting them on the car.
But what goes around comes around they say
SNetters should be aware of goods sold by you!
#20
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jan 2008
Location: Scotland
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
And S/nettters should be aware of s**t stirrers like you. Now go and annoy someone else and use this forum section as it should be used !!!
Last edited by tommo9375; 27 July 2010 at 10:59 AM.
#22
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jan 2008
Location: Scotland
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
There is a feedback scheme you idiot ,it's called 'traders score' underneath each users name ,i'd thought you would've known that as you have used this website for sometime looking at your 'post' count -or do you just come on here to slag people off ,looks like it....
#23
Scooby Regular
iTrader: (11)
Feedback left, I wasn't aware of the traders score.
And for others to remember:
https://www.scoobynet.com/private-fo...ti-alloys.html
https://www.scoobynet.com/showpost.p...3&postcount=12 <-- Post about them being straight edited after my reply that they were bent!!!
https://www.scoobynet.com/showpost.p...1&postcount=22
And for others to remember:
https://www.scoobynet.com/private-fo...ti-alloys.html
https://www.scoobynet.com/showpost.p...3&postcount=12 <-- Post about them being straight edited after my reply that they were bent!!!
https://www.scoobynet.com/showpost.p...1&postcount=22
Last edited by fpan; 27 July 2010 at 01:29 PM.
#26
Scooby Regular
iTrader: (54)
look fpan if uve got a prob with him then start a thread like everyone else who has problems do ,but stop spamming his post as i cant be assed reading all this crap when i only wanted to look at his car pics,
back on topic,
they look nice mate, loving the black and white look at the moment,
back on topic,
they look nice mate, loving the black and white look at the moment,
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
General Technical
0
30 September 2015 06:29 PM