Reverse inlet pipe work finished
#1
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: sunderland
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Reverse inlet pipe work finished
Well just finished my pipe work wrapped it just to test I've bought some TITANIUM heat wrap just need belt , tensioner and a MASSIVE CLEAN.
[IMG][/IMG]
[IMG][/IMG]
#4
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: sunderland
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Haha yeah me flash was on its not staying on I've got some titanium wrap just waitin to be delivered
A few reasons 1. I've saved about 1-2 foot of pipe work, looks better IMO. And lastly quite a rare thing on v1's with it needing cut and welded.
The gains are not guna me massive but every gain is a good gain plus the inlet has been smoothed and had a lot of wholes n brackets taken off so looks nicer
A few reasons 1. I've saved about 1-2 foot of pipe work, looks better IMO. And lastly quite a rare thing on v1's with it needing cut and welded.
The gains are not guna me massive but every gain is a good gain plus the inlet has been smoothed and had a lot of wholes n brackets taken off so looks nicer
#7
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: sunderland
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Thanks mate tbh I agree with you only Get what u pay for with heat wrap I bought some cheap stuff the black one , the white one was better quality a little more pricey but the titanium one is more and it feels and looks it
Trending Topics
#8
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Wrap looks better, but, I think you're going to regret making the intercooler pipe without having the parts for tensioning the alternator belt.
#10
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Really, we looking at the same picture, Dean?
Alternator is sitting as far down as it can, and the pipe for your chav trumpet is clearly wedged between the alternator and the dipstick.
Would have been better if you'd had the parts for tensioning the belt, so you can get it somewhere near, and then making the intercooler pipe.
That way you can see where the belt will be and eliminate any chance of it rubbing.
Alternator is sitting as far down as it can, and the pipe for your chav trumpet is clearly wedged between the alternator and the dipstick.
Would have been better if you'd had the parts for tensioning the belt, so you can get it somewhere near, and then making the intercooler pipe.
That way you can see where the belt will be and eliminate any chance of it rubbing.
#14
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: sunderland
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
No there's loads of room when u see it and it's not a chav trumpet and
guiness 2 words for you **** off !!!!! Simplessss if you don't like it done comment u idiot I wouldn't comment calling your car so show some respect tit!!!!! Funny how you have no pics of your car yet mines a mess????? Typical arsehole insulting peoples cars instead of saying its not my thing but fair play!!!! No wonder forums go **** up with obnoxious people like u
Steve the car hasn't been mapped yet mate its going to be trailered to Duncan to be mapped to not too worried about that is there anything you would reccomend before mapping??? Cheers
guiness 2 words for you **** off !!!!! Simplessss if you don't like it done comment u idiot I wouldn't comment calling your car so show some respect tit!!!!! Funny how you have no pics of your car yet mines a mess????? Typical arsehole insulting peoples cars instead of saying its not my thing but fair play!!!! No wonder forums go **** up with obnoxious people like u
Steve the car hasn't been mapped yet mate its going to be trailered to Duncan to be mapped to not too worried about that is there anything you would reccomend before mapping??? Cheers
Last edited by banzai2009; 25 August 2012 at 12:09 AM.
#16
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: sunderland
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
It's not finished either if you havt noticed!!! Pipes still off needs cleaning wtc etc if you had took time to read it properly but thanks for your support I'll take your opinion on board and ignore it...
Not sure why your even commenting what's the point of insulting people's cars??? If you don't like it just don't comment
Not sure why your even commenting what's the point of insulting people's cars??? If you don't like it just don't comment
#19
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: sunderland
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
It's not finished as said in title I agree full of idiots just showing where I've started etc as you've got to start somewhere I've got a lot of hours to do on it.
I dont mind " positive critism" as I expect it as everyone is different and rightly so but to just plain insult someone/something isn't very respectful tbhif I see a car on here I'm not keen on I'd say not my cup of tea but looks well etc ..
It's always the same people on forums with no pic of any kind and just purposely go on forums to cause arguments
But hey ho u get them but he will eat his words once finished and everything's polished
I dont mind " positive critism" as I expect it as everyone is different and rightly so but to just plain insult someone/something isn't very respectful tbhif I see a car on here I'm not keen on I'd say not my cup of tea but looks well etc ..
It's always the same people on forums with no pic of any kind and just purposely go on forums to cause arguments
But hey ho u get them but he will eat his words once finished and everything's polished
#20
Scooby Regular
iTrader: (1)
Join Date: Dec 2002
Location: Surrey
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure it says FINISHED in your thread...but never mind..
I thought i'd show you what a V1 reversed inlet manifold looks like when done with a bit of care...By the way this is mine...
I thought i'd show you what a V1 reversed inlet manifold looks like when done with a bit of care...By the way this is mine...
#23
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: sunderland
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Yeah well we all don't live at home with mammy or spend every penny on our cars I prefer to spend on me kids or house ..
N read underneath it see pipe work that's it . I'm sure I've seen that pic on another forum under a different user name??? Funny tht????
We do the best with what we had and money available
Personally still think your obnoxious you could of gave some ideas or hint n tips but no doubt you didn't do it yourself and paid someone to do it!!! This is the first attempt maybe I have got a few things to iron out that's why it's ongoing still don't understand why you commented the way u did there was no point at all in your comment othe than to be obnoxious and rude .... Not all of us have thousands and thousands to plough into our cars n considering I'm doin it in a budget cnt see the problem n let's face it tw Benifits are going to be exactly the same as yours
N read underneath it see pipe work that's it . I'm sure I've seen that pic on another forum under a different user name??? Funny tht????
We do the best with what we had and money available
Personally still think your obnoxious you could of gave some ideas or hint n tips but no doubt you didn't do it yourself and paid someone to do it!!! This is the first attempt maybe I have got a few things to iron out that's why it's ongoing still don't understand why you commented the way u did there was no point at all in your comment othe than to be obnoxious and rude .... Not all of us have thousands and thousands to plough into our cars n considering I'm doin it in a budget cnt see the problem n let's face it tw Benifits are going to be exactly the same as yours
#26
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: sunderland
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
I just don't see why certain people on forums constantly have to cause arguments and insulting instead of offering advise or hints how to make better as I've never done this before and funny how when I made a post asking for advise this idiot guiness need offered his ???!!! But jumped on the band wagon ti insult n people wonder why forums gain a bad name or people stop going on or don't bother
#27
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
What was originally said, and repeated in his second post. It's his opinion, and frankly it's tamer than a lot of things I've seen on here in the last 7 years.
Then you come out with this.
You're the one insulting people Dean. If you don't like peoples opinions, then don't post.
Then you come out with this.
You're the one insulting people Dean. If you don't like peoples opinions, then don't post.
Last edited by mickywrx; 25 August 2012 at 06:51 PM.
#28
Scooby Regular
iTrader: (10)
Join Date: Oct 2003
Location: berks
Posts: 1,174
Likes: 0
Received 0 Likes
on
0 Posts
I can assure you that you wont of seen that pic anywhere on any other forum as it was me and guiness(alan) that put that setup together, as he stated you said it was finished or atleast thats how you started the thread.