Directors Advice (frame rate recording)
27 December 2002, 09:21 AM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
any advice on what frame rate I should use for videoing the various DIY projects on the car !
bit of a first timer at this
I was thinking 1 sec in every 30 sec ?
Is there a rule of thumb to use, estimated work time = 4 hrs (i'm removing the headers, porting them and changing up pipe.
My maths is not so good
4 hrs = 240 mins = 14,400 secs
2 secs every min would be :
480 secs = 8 mins
8 mins of me under my car scrabbling about ???
would that be too long / boring
Cheers for any advice / sarcastic comments
Andy
bit of a first timer at this
I was thinking 1 sec in every 30 sec ?
Is there a rule of thumb to use, estimated work time = 4 hrs (i'm removing the headers, porting them and changing up pipe.
My maths is not so good
4 hrs = 240 mins = 14,400 secs
2 secs every min would be :
480 secs = 8 mins
8 mins of me under my car scrabbling about ???
would that be too long / boring
Cheers for any advice / sarcastic comments
Andy
27 December 2002, 09:29 AM
#2
Too long/boring?
Surely that depends on who's watching it, doesn't it? I could have easily sat through another 4 hours of LOTR part one, but rest of family had had enough after 3.5.
Your rate seems OK, but may miss a crucial bit: 30 seconds is a long time. Why not make it longer, then spend half an hour editing out bits where all you can see is you under the car?
Oh and DO use axle stands etc: we don't want to be reading about any nasty accidents on here thankyou!
:
Alcazar
Surely that depends on who's watching it, doesn't it? I could have easily sat through another 4 hours of LOTR part one, but rest of family had had enough after 3.5.
Your rate seems OK, but may miss a crucial bit: 30 seconds is a long time. Why not make it longer, then spend half an hour editing out bits where all you can see is you under the car?
Oh and DO use axle stands etc: we don't want to be reading about any nasty accidents on here thankyou!
:Alcazar
27 December 2002, 09:36 AM
#3
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
been there done that
Imagine an old fiesta if you will, with a nice big straight beam axle at the back, was working on the hanbrake cable I think, both back wheels were off, I had the Jack on the beam axle in the middle.
.
.
.
till I managed to yank on the cable a bit hard
the jack slid across the axle, putting the weight of the car in fresh air fastest I moved all year
p.s I learn't my lesson
Andy
Imagine an old fiesta if you will, with a nice big straight beam axle at the back, was working on the hanbrake cable I think, both back wheels were off, I had the Jack on the beam axle in the middle.
.
.
.
till I managed to yank on the cable a bit hard
the jack slid across the axle, putting the weight of the car in fresh air
fastest I moved all year p.s I learn't my lesson
Andy
27 December 2002, 09:39 AM
#4
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
shame there's no telephone cable in the garage.
I could have the Pc out there then.
.
.
NO ! bad idea, I would never get anything done
Andy
<mental note : PUT ON OVERALLS AND DO SOME BLOOODY WORK >
I could have the Pc out there then.
.
.
NO ! bad idea, I would never get anything done
Andy
<mental note : PUT ON OVERALLS AND DO SOME BLOOODY WORK >
27 December 2002, 11:45 AM
#6
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
[img]images/smilies/mad.gif[/img]
batteries flat
how do I get grease off my keyboard
just come in for a cuppa and toast...honest
Andy
batteries flat
how do I get grease off my keyboard
just come in for a cuppa and toast...honest
Andy
Trending Topics
27 December 2002, 12:50 PM
#8
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
had a quick look at it just now (got the mains adapter out )
HOW MUCH do I TALK to my self and SWEAR !!!!!
anybody want a laugh I'll stick it up UNEDITED on my site later
moved on to digi camera now for some pics.
batteries don't look to healthy in there either :/
)HOW MUCH do I TALK to my self and SWEAR !!!!!
anybody want a laugh
I'll stick it up UNEDITED on my site latermoved on to digi camera now for some pics.
batteries don't look to healthy in there either :/
27 December 2002, 04:19 PM
#9
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
In 45 mins this little snippet of the vid will be live.
I think I may have overdone the quality
7.5MB for 15 secs is a bit much
anyway for those that have their feet up at work, this might give you something to do
http://home.clara.net/andy.c/cap0006.mpg
cheers
Andy
edit to fix link, 3rd time lucky
[Edited by Fuzz - 12/27/2002 4:26:59 PM]
I think I may have overdone the quality
7.5MB for 15 secs is a bit much
anyway for those that have their feet up at work, this might give you something to do
http://home.clara.net/andy.c/cap0006.mpg
cheers
Andy
edit to fix link, 3rd time lucky
[Edited by Fuzz - 12/27/2002 4:26:59 PM]
27 December 2002, 06:00 PM
#11
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
just come in to charge the batteries again
so i see sid, will have to have a proper look when i come in with clean hands.
p.s if any one else can see what i have done wrong please let us know ?
Cheers
Andy
http://home.clara.net/andy.c/
should be under the engine page.......
so i see sid, will have to have a proper look when i come in with clean hands.
p.s if any one else can see what i have done wrong please let us know ?
Cheers
Andy
http://home.clara.net/andy.c/
should be under the engine page.......
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM